BMC Performance Air Filter (Macan 95B.2)

2021-08-02T08:15:14-04:00

Vendor: BMC
Type: Intake
Price: 185.90

Designed to fit:

2019+ Porsche Macan S (95B.2)

2020+ Porsche Macan Turbo (95B.2)

2020+ Porsche Macan GTS (95B.2)

2022+ Porsche Macan S / GTS (95B.3)

Product Details

BETTER THAN OEM FILTERS

OEM paper filters present an elevated resistance to the passage of air and consequently a reduction in engine performance. Compared to a paper filter the BMC air filter for your Macan 95B.2 permits a notably higher air flow passage, producing less than half the Pressure Drop (difference between the air pressure before and after the filter element) over the paper filters. This doesn't compromise the filter's engine protection efficiency: thanks to the combination of the different oiled layers, containment of all impurities is guaranteed as far as 7 microns, while paper filters generally require total filtration of particles as small as 10 microns. So BMC air filters let more air into the engine while still protecting it better than paper ones. In addition, a traditional paper filter must be replaced regularly during routine maintenance whilst the BMC air filter is reusable and has a general life-span equal to that of the vehicle.

BETTER THAN SYNTHETIC FILTERS

The principal difference between BMC oiled cotton filters and synthetic material filters (for example, plastic material cloth) is seen in the ability to retain air impurities. Synthetic filters allow the passage to particles smaller than the size of the tiny holes in the filtration material- this means that a filter with 80 micron holes allows the passage of all elements of a size smaller than the hole, only guaranteeing containment of particles larger than the dimension of the hole (for example - sand has a dimension of around 50 microns). The cotton has a wider texture which favors a greater air-flow passage and through the combination of the different oiled layers, guarantees containment of all impurities from as small as 7 microns.

BETTER THAN OTHER COTTON FILTERS

BMC's support frame structures are manufactured using a unique procedure called “Full Moulding” which enables the production of the characteristic red filter from a single mould without the need for gluing at the corners, often the cause of easy breakage.

BMC reusable air filters have the smallest rubber infringement in the market (less than 6mm), thus allowing the maximum filtering surface.