{"title":"ClutchMasters","description":"","products":[{"product_id":"clutch-masters-fx250-clutch-kit-987-cayman-cayman-s","title":"Clutch Masters FX Series Clutch Kit (987 Cayman)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e2006 - 2008 Porsche Cayman \/ S (2.7L and 3.4L non-DFI)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e2009 - 2011 Porsche Cayman (2.9L)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProduct Details:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for.\u003c\/p\u003e\n\u003cp\u003eNote, the 250R, 350R, and FX500 kits all feature an unsprung clutch disc, meant for race use only in combination with a Single Mass Flywheel, also available from Clutchmasters.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan\u003eKit Includes\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePressure Plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eClutch Disc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThrow-out Bearing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePilot Bearing or Bushing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlignment Tool\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFX100 - STREET - 70% Increased holding capacity\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX250 - STREET- 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX350 - STREET\/RACE - 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX400 - RACE\/STREET - 170% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX500 - RACE USE ONLY - 200% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAbout Clutch Masters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/CM.jpg?v=1472158582\" alt=\"\" width=\"235\" height=\"83\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003eHigh Technology Makes the Difference\u003c\/div\u003e\n\u003cp\u003eHistorically, high performance clutches have been a compromise. While improving holding or clamping pressure, manufacturers nearly always increase pedal pressure to an uncomfortable point, especially for stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eBesides drivability concerns, additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear, leading to missed shifts, damaged clutch components, and even engine destruction.\u003c\/p\u003e\n\u003cp\u003eToday, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technique, Clutch Masters has increased clamping power, often without changing pedal pressure.\u003c\/p\u003e\n\u003cp\u003eExcessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.\u003c\/p\u003e\n\u003cp\u003eA clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.\u003c\/p\u003e\n\u003cdiv\u003eClamping Force vs. Pedal Pressure\u003c\/div\u003e\n\u003cp\u003eDesigning heavy duty and high performance clutches with a very high clamp load and incredible coefficient of friction is a fairly simple engineering task. To do so without increasing pedal pressure has not been so easy. Even the education process of changing opinions that an increase in pedal pressure must accompany a high performance clutch with increased clamping force has been difficult.\u003c\/p\u003e\n\u003cp\u003eClutch Masters, a premier manufacturer of fine quality clutches since 1976, has taken this experience and a clean sheet of paper to re-engineer their line of performance clutches to address these problems. The proof of this success is now available from Clutch Masters as a complete line of clutch systems for high performance street and racing use. It is the first major breakthrough in performance clutches in over four decades.\u003c\/p\u003e\n\u003cp\u003eFollowing are ways of increasing clamp load. The methods vary in sophistication and effectiveness:\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHeat Treating\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe diaphragm, or spring, is heat treated to increase spring tension for 10-40% more clamping force. This typically makes the diaphragm more brittle and more subject to premature failure. Many high performance clutch manufacturers use this procedure. Clutch Masters has perfected a more precise method of heat-treating its diaphragms to maintain consistent clamping force without compromising structural integrity.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDouble Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe double diaphragm is a method of increasing clamping force by stacking two diaphragms on top of each other. This will typically achieve the desired clamping force but will also increase the pedal pressure to a very high rate. For FX 500 and Multiple Disc set-ups, Clutch Masters uses two separate heat treating processes - one for each diaphragm - to ensure perfect compatibility between the two diaphragms. Additionally, there is a special friction-reducing material between the diaphragms to provide optimum clamping force while maintaining an ultra smooth operation.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThicker Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA thicker (than stock) diaphragm allows extra clamping force but is considered to be an on or off style clutch. Smooth engagement is severely compromised with the thick diaphragm due to the reduced elasticity of the thicker material. Clutch Masters does not use this technique.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHi-Leverage\u003csup\u003etm\u003c\/sup\u003e Pressure Plate\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy re-engineering the pressure plate leverage ring (moving it closer to the pivot point), Clutch Masters solves the clamping vs. pedal pressure problem in a unique way. By moving the pressure ring, Clutch Masters Hi-Leverage\u003csup\u003etm \u003c\/sup\u003ePressure Plates take mechanical advantage of the leverage principle. By moving the leverage ring closer to the pivot point, the pressure applied to the plate is increased significantly without unnecessarily increasing pedal pressure, as is typically the case in other clutches. This Hi-Leverage\u003csup\u003etm\u003c\/sup\u003efeature is unique to the high-performance clutch industry.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e***By combining these various methods of increasing clamping pressure with their re-engineered discs, Clutch Masters has developed a unique way of substantially increasing clutch performance without any of the negative side affects usually found in the typical high performance clutch.****\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Difference:\u003c\/p\u003e\n\u003cp\u003eClutch Masters clutches are true High Performance Clutch Systems and are technologically superior to anything currently on the market.\u003c\/p\u003e\n\u003cp\u003eTo develop a clutch with all the desired performance characteristics for intended applications is the challenge of a high performance clutch company. The Clutch Masters clutch system is unique in the industry. We use Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technology (refer to the Pressure Plate section) in our pressure plates, which significantly increases clamping force with no unnecessary increase in pedal pressure. Discs are designed either with reduced Marcel or a solid hub design to take advantage of our Hi-Leverage\u003csup\u003etm\u003c\/sup\u003epressure plate. The combination of these cutting edge technologies creates the finest clutch system on the market.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Clutch Masters, with over 35 years in the industry, has researched hundreds of friction materials and uses only the best materials available for each intended application. By combining the optimum clamping force with the finest friction materials - each with their own unique coefficient of friction - Clutch Masters has developed a line of clutches that provide ultimate performance in virtually any severe environment.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecific Purposes\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Clutch Masters clutches are specifically designed for varying stages of high performance and\/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition, Clutch Masters offers complete clutch systems.\u003c\/div\u003e\n\u003cp\u003eWhen the Class 30 Grey Iron material of a typical pressure plate is not suitable, Clutch Masters uses doubly strong Ductile Iron, which is the case with most CM clutches.\u003c\/p\u003e\n\u003cp\u003eThe friction material found on all OE discs and many high performance discs is simply riveted to the disc center section. Under severe use and\/or high RPM applications, the disc material can fragment and break apart, becoming dislodged from the disc center section. Once this occurs, the clutch has failed completely and is rendered inoperable. Clutch Masters has solved this common problem on their street and street\/strip discs by bonding a special steel backing plate (see disc technology and figure X) to the friction material. This unique feature provides significantly increased heat dissipation properties - heat is the #1 enemy of the clutch - and very high structural integrity to keep the disc intact under severe applications.\u003c\/p\u003e\n\u003cp\u003eRacing Only discs use solid center sections to give all the reliability and performance they need on the track. Warning: These solid hub discs are not meant for street applications as they transfer very high shock loads to the transmission, causing premature transmission failure, and will chatter upon starting from a stop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Weakest Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIn the battle of Man vs. Machine, whenever possible, engineers build into any given mechanical system a point of failure, or weak point, which is designed to wear or fail, therefore preventing damaging major components or even catastrophic failure of the entire system.\u003c\/div\u003e\n\u003cp\u003eIn the battle of Engine vs. Transmission, the clutch is designed to be that weak link. It is ultimately less expensive to replace a clutch than an engine or transmission. The challenge in building a high performance clutch is to build the unit for different intended heavy duty or severe applications which will hold the power; not break the transmission or internal engine components and retain an overall smooth operation of the entire system (whenever possible). This is the balancing act that Clutch Masters has perfected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"FX350","offer_id":31965936484436,"sku":"clm20606-HDFF-D","price":1237.0,"currency_code":"USD","in_stock":true},{"title":"FX500","offer_id":31965936582740,"sku":"clm20606-HDB6-R","price":1237.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/e513a057-3641-4f11-998f-c3622da42d2a-420.jpg?v=1527265649"},{"product_id":"clutch-masters-lightweight-aluminum-flywheel-987-cayman-boxster","title":"Clutch Masters Aluminum Lightweight Flywheel (987 Cayman \/ Boxster)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\" mce-data-marked=\"1\"\u003e2005 - 2012 Porsche Cayman \u0026amp; Boxster (2.5L, 2.7L, 3.2L, 3.4L)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProduct Details:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFeatures\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduced mass equals increased acceleration\u003c\/li\u003e\n\u003cli\u003eA lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag\u003c\/li\u003e\n\u003cli\u003eIncreased supercharger efficiency due to less parasitic drag on the crank\u003c\/li\u003e\n\u003cli\u003eImproved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel\u003c\/li\u003e\n\u003cli\u003eCM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels\u003c\/li\u003e\n\u003cli\u003eCM uses High Carbon steel for the friction surface\u003c\/li\u003e\n\u003cli\u003eCM uses an OEM steel ring gear secured by bolts\u003c\/li\u003e\n\u003cli\u003eCM offers a limited lifetime warranty\u003c\/li\u003e\n\u003cli\u003eCM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2\u003c\/li\u003e\n\u003cli\u003eWeight: 14lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAbout Clutch Masters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/CM.jpg?v=1472158582\" alt=\"\" width=\"235\" height=\"83\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003eHigh Technology Makes the Difference\u003c\/div\u003e\n\u003cp\u003eHistorically, high performance clutches have been a compromise. While improving holding or clamping pressure, manufacturers nearly always increase pedal pressure to an uncomfortable point, especially for stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eBesides drivability concerns, additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear, leading to missed shifts, damaged clutch components, and even engine destruction.\u003c\/p\u003e\n\u003cp\u003eToday, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technique, Clutch Masters has increased clamping power, often without changing pedal pressure.\u003c\/p\u003e\n\u003cp\u003eExcessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.\u003c\/p\u003e\n\u003cp\u003eA clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.\u003c\/p\u003e\n\u003cdiv\u003eClamping Force vs. Pedal Pressure\u003c\/div\u003e\n\u003cp\u003eDesigning heavy duty and high performance clutches with a very high clamp load and incredible coefficient of friction is a fairly simple engineering task. To do so without increasing pedal pressure has not been so easy. Even the education process of changing opinions that an increase in pedal pressure must accompany a high performance clutch with increased clamping force has been difficult.\u003c\/p\u003e\n\u003cp\u003eClutch Masters, a premier manufacturer of fine quality clutches since 1976, has taken this experience and a clean sheet of paper to re-engineer their line of performance clutches to address these problems. The proof of this success is now available from Clutch Masters as a complete line of clutch systems for high performance street and racing use. It is the first major breakthrough in performance clutches in over four decades.\u003c\/p\u003e\n\u003cp\u003eFollowing are ways of increasing clamp load. The methods vary in sophistication and effectiveness:\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHeat Treating\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe diaphragm, or spring, is heat treated to increase spring tension for 10-40% more clamping force. This typically makes the diaphragm more brittle and more subject to premature failure. Many high performance clutch manufacturers use this procedure. Clutch Masters has perfected a more precise method of heat-treating its diaphragms to maintain consistent clamping force without compromising structural integrity.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDouble Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe double diaphragm is a method of increasing clamping force by stacking two diaphragms on top of each other. This will typically achieve the desired clamping force but will also increase the pedal pressure to a very high rate. For FX 500 and Multiple Disc set-ups, Clutch Masters uses two separate heat treating processes - one for each diaphragm - to ensure perfect compatibility between the two diaphragms. Additionally, there is a special friction-reducing material between the diaphragms to provide optimum clamping force while maintaining an ultra smooth operation.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThicker Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA thicker (than stock) diaphragm allows extra clamping force but is considered to be an on or off style clutch. Smooth engagement is severely compromised with the thick diaphragm due to the reduced elasticity of the thicker material. Clutch Masters does not use this technique.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHi-Leverage\u003csup\u003etm\u003c\/sup\u003e Pressure Plate\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy re-engineering the pressure plate leverage ring (moving it closer to the pivot point), Clutch Masters solves the clamping vs. pedal pressure problem in a unique way. By moving the pressure ring, Clutch Masters Hi-Leverage\u003csup\u003etm \u003c\/sup\u003ePressure Plates take mechanical advantage of the leverage principle. By moving the leverage ring closer to the pivot point, the pressure applied to the plate is increased significantly without unnecessarily increasing pedal pressure, as is typically the case in other clutches. This Hi-Leverage\u003csup\u003etm\u003c\/sup\u003efeature is unique to the high-performance clutch industry.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e***By combining these various methods of increasing clamping pressure with their re-engineered discs, Clutch Masters has developed a unique way of substantially increasing clutch performance without any of the negative side affects usually found in the typical high performance clutch.****\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Difference:\u003c\/p\u003e\n\u003cp\u003eClutch Masters clutches are true High Performance Clutch Systems and are technologically superior to anything currently on the market.\u003c\/p\u003e\n\u003cp\u003eTo develop a clutch with all the desired performance characteristics for intended applications is the challenge of a high performance clutch company. The Clutch Masters clutch system is unique in the industry. We use Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technology (refer to the Pressure Plate section) in our pressure plates, which significantly increases clamping force with no unnecessary increase in pedal pressure. Discs are designed either with reduced Marcel or a solid hub design to take advantage of our Hi-Leverage\u003csup\u003etm\u003c\/sup\u003epressure plate. The combination of these cutting edge technologies creates the finest clutch system on the market.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Clutch Masters, with over 35 years in the industry, has researched hundreds of friction materials and uses only the best materials available for each intended application. By combining the optimum clamping force with the finest friction materials - each with their own unique coefficient of friction - Clutch Masters has developed a line of clutches that provide ultimate performance in virtually any severe environment.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecific Purposes\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Clutch Masters clutches are specifically designed for varying stages of high performance and\/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition, Clutch Masters offers complete clutch systems.\u003c\/div\u003e\n\u003cp\u003eWhen the Class 30 Grey Iron material of a typical pressure plate is not suitable, Clutch Masters uses doubly strong Ductile Iron, which is the case with most CM clutches.\u003c\/p\u003e\n\u003cp\u003eThe friction material found on all OE discs and many high performance discs is simply riveted to the disc center section. Under severe use and\/or high RPM applications, the disc material can fragment and break apart, becoming dislodged from the disc center section. Once this occurs, the clutch has failed completely and is rendered inoperable. Clutch Masters has solved this common problem on their street and street\/strip discs by bonding a special steel backing plate (see disc technology and figure X) to the friction material. This unique feature provides significantly increased heat dissipation properties - heat is the #1 enemy of the clutch - and very high structural integrity to keep the disc intact under severe applications.\u003c\/p\u003e\n\u003cp\u003eRacing Only discs use solid center sections to give all the reliability and performance they need on the track. Warning: These solid hub discs are not meant for street applications as they transfer very high shock loads to the transmission, causing premature transmission failure, and will chatter upon starting from a stop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Weakest Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIn the battle of Man vs. Machine, whenever possible, engineers build into any given mechanical system a point of failure, or weak point, which is designed to wear or fail, therefore preventing damaging major components or even catastrophic failure of the entire system.\u003c\/div\u003e\n\u003cp\u003eIn the battle of Engine vs. Transmission, the clutch is designed to be that weak link. It is ultimately less expensive to replace a clutch than an engine or transmission. The challenge in building a high performance clutch is to build the unit for different intended heavy duty or severe applications which will hold the power; not break the transmission or internal engine components and retain an overall smooth operation of the entire system (whenever possible). This is the balancing act that Clutch Masters has perfected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"987.1 (Aluminum Only)","offer_id":39592783904852,"sku":"clmFW-005-AL","price":995.0,"currency_code":"USD","in_stock":true},{"title":"987.2 (Steel Only)","offer_id":39592783937620,"sku":"clmFW-971-SF","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/group-0031c615-1763-4395-8ec2-f85d5142646b-420.jpg?v=1527265650"},{"product_id":"clutch-masters-fx250-clutch-kit-987-boxster-boxster-s","title":"Clutch Masters FX Series Clutch Kit (987 Boxster 2.7L)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2005 - 2007 Porsche \u003cstrong\u003eBoxster\u003c\/strong\u003e (2.7L Only)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProduct Details:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for.\u003c\/p\u003e\n\u003cp\u003eNote, the 250R, 350R, and FX500 kits all feature an unsprung clutch disc, meant for race use only in combination with a Single Mass Flywheel, also available from Clutchmasters.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eKit Includes\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePressure Plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eClutch Disc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eThrow-out Bearing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePilot Bearing or Bushing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAlignment Tool\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFX100 - STREET - 70% Increased holding capacity\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX250 - STREET- 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX350 - STREET\/RACE - 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX400 - RACE\/STREET - 170% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX500 - RACE USE ONLY - 200% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAbout Clutch Masters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/CM.jpg?v=1472158582\" alt=\"\" width=\"235\" height=\"83\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003eHigh Technology Makes the Difference\u003c\/div\u003e\n\u003cp\u003eHistorically, high performance clutches have been a compromise. While improving holding or clamping pressure, manufacturers nearly always increase pedal pressure to an uncomfortable point, especially for stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eBesides drivability concerns, additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear, leading to missed shifts, damaged clutch components, and even engine destruction.\u003c\/p\u003e\n\u003cp\u003eToday, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technique, Clutch Masters has increased clamping power, often without changing pedal pressure.\u003c\/p\u003e\n\u003cp\u003eExcessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.\u003c\/p\u003e\n\u003cp\u003eA clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.\u003c\/p\u003e\n\u003cdiv\u003eClamping Force vs. Pedal Pressure\u003c\/div\u003e\n\u003cp\u003eDesigning heavy duty and high performance clutches with a very high clamp load and incredible coefficient of friction is a fairly simple engineering task. To do so without increasing pedal pressure has not been so easy. Even the education process of changing opinions that an increase in pedal pressure must accompany a high performance clutch with increased clamping force has been difficult.\u003c\/p\u003e\n\u003cp\u003eClutch Masters, a premier manufacturer of fine quality clutches since 1976, has taken this experience and a clean sheet of paper to re-engineer their line of performance clutches to address these problems. The proof of this success is now available from Clutch Masters as a complete line of clutch systems for high performance street and racing use. It is the first major breakthrough in performance clutches in over four decades.\u003c\/p\u003e\n\u003cp\u003eFollowing are ways of increasing clamp load. The methods vary in sophistication and effectiveness:\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHeat Treating\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe diaphragm, or spring, is heat treated to increase spring tension for 10-40% more clamping force. This typically makes the diaphragm more brittle and more subject to premature failure. Many high performance clutch manufacturers use this procedure. Clutch Masters has perfected a more precise method of heat-treating its diaphragms to maintain consistent clamping force without compromising structural integrity.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDouble Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe double diaphragm is a method of increasing clamping force by stacking two diaphragms on top of each other. This will typically achieve the desired clamping force but will also increase the pedal pressure to a very high rate. For FX 500 and Multiple Disc set-ups, Clutch Masters uses two separate heat treating processes - one for each diaphragm - to ensure perfect compatibility between the two diaphragms. Additionally, there is a special friction-reducing material between the diaphragms to provide optimum clamping force while maintaining an ultra smooth operation.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThicker Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA thicker (than stock) diaphragm allows extra clamping force but is considered to be an on or off style clutch. Smooth engagement is severely compromised with the thick diaphragm due to the reduced elasticity of the thicker material. Clutch Masters does not use this technique.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHi-Leverage\u003csup\u003etm\u003c\/sup\u003e Pressure Plate\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy re-engineering the pressure plate leverage ring (moving it closer to the pivot point), Clutch Masters solves the clamping vs. pedal pressure problem in a unique way. By moving the pressure ring, Clutch Masters Hi-Leverage\u003csup\u003etm \u003c\/sup\u003ePressure Plates take mechanical advantage of the leverage principle. By moving the leverage ring closer to the pivot point, the pressure applied to the plate is increased significantly without unnecessarily increasing pedal pressure, as is typically the case in other clutches. This Hi-Leverage\u003csup\u003etm\u003c\/sup\u003efeature is unique to the high-performance clutch industry.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e***By combining these various methods of increasing clamping pressure with their re-engineered discs, Clutch Masters has developed a unique way of substantially increasing clutch performance without any of the negative side affects usually found in the typical high performance clutch.****\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Difference:\u003c\/p\u003e\n\u003cp\u003eClutch Masters clutches are true High Performance Clutch Systems and are technologically superior to anything currently on the market.\u003c\/p\u003e\n\u003cp\u003eTo develop a clutch with all the desired performance characteristics for intended applications is the challenge of a high performance clutch company. The Clutch Masters clutch system is unique in the industry. We use Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technology (refer to the Pressure Plate section) in our pressure plates, which significantly increases clamping force with no unnecessary increase in pedal pressure. Discs are designed either with reduced Marcel or a solid hub design to take advantage of our Hi-Leverage\u003csup\u003etm\u003c\/sup\u003epressure plate. The combination of these cutting edge technologies creates the finest clutch system on the market.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Clutch Masters, with over 35 years in the industry, has researched hundreds of friction materials and uses only the best materials available for each intended application. By combining the optimum clamping force with the finest friction materials - each with their own unique coefficient of friction - Clutch Masters has developed a line of clutches that provide ultimate performance in virtually any severe environment.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecific Purposes\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Clutch Masters clutches are specifically designed for varying stages of high performance and\/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition, Clutch Masters offers complete clutch systems.\u003c\/div\u003e\n\u003cp\u003eWhen the Class 30 Grey Iron material of a typical pressure plate is not suitable, Clutch Masters uses doubly strong Ductile Iron, which is the case with most CM clutches.\u003c\/p\u003e\n\u003cp\u003eThe friction material found on all OE discs and many high performance discs is simply riveted to the disc center section. Under severe use and\/or high RPM applications, the disc material can fragment and break apart, becoming dislodged from the disc center section. Once this occurs, the clutch has failed completely and is rendered inoperable. Clutch Masters has solved this common problem on their street and street\/strip discs by bonding a special steel backing plate (see disc technology and figure X) to the friction material. This unique feature provides significantly increased heat dissipation properties - heat is the #1 enemy of the clutch - and very high structural integrity to keep the disc intact under severe applications.\u003c\/p\u003e\n\u003cp\u003eRacing Only discs use solid center sections to give all the reliability and performance they need on the track. Warning: These solid hub discs are not meant for street applications as they transfer very high shock loads to the transmission, causing premature transmission failure, and will chatter upon starting from a stop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Weakest Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIn the battle of Man vs. Machine, whenever possible, engineers build into any given mechanical system a point of failure, or weak point, which is designed to wear or fail, therefore preventing damaging major components or even catastrophic failure of the entire system.\u003c\/div\u003e\n\u003cp\u003eIn the battle of Engine vs. Transmission, the clutch is designed to be that weak link. It is ultimately less expensive to replace a clutch than an engine or transmission. The challenge in building a high performance clutch is to build the unit for different intended heavy duty or severe applications which will hold the power; not break the transmission or internal engine components and retain an overall smooth operation of the entire system (whenever possible). This is the balancing act that Clutch Masters has perfected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"FX250","offer_id":31962219610196,"sku":"clm20505-HD0F-D","price":1237.0,"currency_code":"USD","in_stock":true},{"title":"FX250R","offer_id":31962219642964,"sku":"clm20505-HD0F-R","price":1237.0,"currency_code":"USD","in_stock":true},{"title":"FX350","offer_id":31962219675732,"sku":"clm20505-HRFF-D","price":1237.0,"currency_code":"USD","in_stock":true},{"title":"FX350R","offer_id":31962219708500,"sku":"clm20505-HDFF-R","price":1237.0,"currency_code":"USD","in_stock":true},{"title":"FX400","offer_id":31962219741268,"sku":"clm20505-HDC6-D","price":1237.0,"currency_code":"USD","in_stock":true},{"title":"FX500","offer_id":31962219774036,"sku":"clm20505-HDB6-R","price":1237.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/e513a057-3641-4f11-998f-c3622da42d2a-420_89b6101b-0dd9-45fc-ad68-067f0be8391a.jpg?v=1527265649"},{"product_id":"clutch-masters-fx250-clutch-kit-997-2","title":"Clutch Masters FX Series Clutch Kit (997.2 Carrera)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e2009 - 2012 Porsche 911 Carrera \/ S \/ 4 \/ 4S (3.6 and 3.8L)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNote: This is a special order item that ships directly from the manufacturer.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProduct Details:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNote, the 250R, 350R, and FX500 kits all feature an unsprung clutch disc, meant for race use only in combination with a Single Mass Flywheel, also available from Clutchmasters.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eKit Includes\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePressure Plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eClutch Disc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eThrow-out Bearing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePilot Bearing or Bushing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAlignment Tool\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFX100 - STREET - 70% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFX250 - STREET- 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFX350 - STREET\/RACE - 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFX400 - RACE\/STREET - 170% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFX500 - RACE USE ONLY - 200% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAbout Clutch Masters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/CM.jpg?v=1472158582\" alt=\"\" width=\"235\" height=\"83\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003eHigh Technology Makes the Difference\u003c\/div\u003e\n\u003cp\u003eHistorically, high performance clutches have been a compromise. While improving holding or clamping pressure, manufacturers nearly always increase pedal pressure to an uncomfortable point, especially for stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eBesides drivability concerns, additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear, leading to missed shifts, damaged clutch components, and even engine destruction.\u003c\/p\u003e\n\u003cp\u003eToday, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technique, Clutch Masters has increased clamping power, often without changing pedal pressure.\u003c\/p\u003e\n\u003cp\u003eExcessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.\u003c\/p\u003e\n\u003cp\u003eA clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.\u003c\/p\u003e\n\u003cdiv\u003eClamping Force vs. Pedal Pressure\u003c\/div\u003e\n\u003cp\u003eDesigning heavy duty and high performance clutches with a very high clamp load and incredible coefficient of friction is a fairly simple engineering task. To do so without increasing pedal pressure has not been so easy. Even the education process of changing opinions that an increase in pedal pressure must accompany a high performance clutch with increased clamping force has been difficult.\u003c\/p\u003e\n\u003cp\u003eClutch Masters, a premier manufacturer of fine quality clutches since 1976, has taken this experience and a clean sheet of paper to re-engineer their line of performance clutches to address these problems. The proof of this success is now available from Clutch Masters as a complete line of clutch systems for high performance street and racing use. It is the first major breakthrough in performance clutches in over four decades.\u003c\/p\u003e\n\u003cp\u003eFollowing are ways of increasing clamp load. The methods vary in sophistication and effectiveness:\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHeat Treating\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe diaphragm, or spring, is heat treated to increase spring tension for 10-40% more clamping force. This typically makes the diaphragm more brittle and more subject to premature failure. Many high performance clutch manufacturers use this procedure. Clutch Masters has perfected a more precise method of heat-treating its diaphragms to maintain consistent clamping force without compromising structural integrity.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDouble Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe double diaphragm is a method of increasing clamping force by stacking two diaphragms on top of each other. This will typically achieve the desired clamping force but will also increase the pedal pressure to a very high rate. For FX 500 and Multiple Disc set-ups, Clutch Masters uses two separate heat treating processes - one for each diaphragm - to ensure perfect compatibility between the two diaphragms. Additionally, there is a special friction-reducing material between the diaphragms to provide optimum clamping force while maintaining an ultra smooth operation.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThicker Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA thicker (than stock) diaphragm allows extra clamping force but is considered to be an on or off style clutch. Smooth engagement is severely compromised with the thick diaphragm due to the reduced elasticity of the thicker material. Clutch Masters does not use this technique.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHi-Leverage\u003csup\u003etm\u003c\/sup\u003e Pressure Plate\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy re-engineering the pressure plate leverage ring (moving it closer to the pivot point), Clutch Masters solves the clamping vs. pedal pressure problem in a unique way. By moving the pressure ring, Clutch Masters Hi-Leverage\u003csup\u003etm \u003c\/sup\u003ePressure Plates take mechanical advantage of the leverage principle. By moving the leverage ring closer to the pivot point, the pressure applied to the plate is increased significantly without unnecessarily increasing pedal pressure, as is typically the case in other clutches. This Hi-Leverage\u003csup\u003etm\u003c\/sup\u003efeature is unique to the high-performance clutch industry.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e***By combining these various methods of increasing clamping pressure with their re-engineered discs, Clutch Masters has developed a unique way of substantially increasing clutch performance without any of the negative side affects usually found in the typical high performance clutch.****\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Difference:\u003c\/p\u003e\n\u003cp\u003eClutch Masters clutches are true High Performance Clutch Systems and are technologically superior to anything currently on the market.\u003c\/p\u003e\n\u003cp\u003eTo develop a clutch with all the desired performance characteristics for intended applications is the challenge of a high performance clutch company. The Clutch Masters clutch system is unique in the industry. We use Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technology (refer to the Pressure Plate section) in our pressure plates, which significantly increases clamping force with no unnecessary increase in pedal pressure. Discs are designed either with reduced Marcel or a solid hub design to take advantage of our Hi-Leverage\u003csup\u003etm\u003c\/sup\u003epressure plate. The combination of these cutting edge technologies creates the finest clutch system on the market.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Clutch Masters, with over 35 years in the industry, has researched hundreds of friction materials and uses only the best materials available for each intended application. By combining the optimum clamping force with the finest friction materials - each with their own unique coefficient of friction - Clutch Masters has developed a line of clutches that provide ultimate performance in virtually any severe environment.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecific Purposes\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Clutch Masters clutches are specifically designed for varying stages of high performance and\/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition, Clutch Masters offers complete clutch systems.\u003c\/div\u003e\n\u003cp\u003eWhen the Class 30 Grey Iron material of a typical pressure plate is not suitable, Clutch Masters uses doubly strong Ductile Iron, which is the case with most CM clutches.\u003c\/p\u003e\n\u003cp\u003eThe friction material found on all OE discs and many high performance discs is simply riveted to the disc center section. Under severe use and\/or high RPM applications, the disc material can fragment and break apart, becoming dislodged from the disc center section. Once this occurs, the clutch has failed completely and is rendered inoperable. Clutch Masters has solved this common problem on their street and street\/strip discs by bonding a special steel backing plate (see disc technology and figure X) to the friction material. This unique feature provides significantly increased heat dissipation properties - heat is the #1 enemy of the clutch - and very high structural integrity to keep the disc intact under severe applications.\u003c\/p\u003e\n\u003cp\u003eRacing Only discs use solid center sections to give all the reliability and performance they need on the track. Warning: These solid hub discs are not meant for street applications as they transfer very high shock loads to the transmission, causing premature transmission failure, and will chatter upon starting from a stop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Weakest Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIn the battle of Man vs. Machine, whenever possible, engineers build into any given mechanical system a point of failure, or weak point, which is designed to wear or fail, therefore preventing damaging major components or even catastrophic failure of the entire system.\u003c\/div\u003e\n\u003cp\u003eIn the battle of Engine vs. Transmission, the clutch is designed to be that weak link. It is ultimately less expensive to replace a clutch than an engine or transmission. The challenge in building a high performance clutch is to build the unit for different intended heavy duty or severe applications which will hold the power; not break the transmission or internal engine components and retain an overall smooth operation of the entire system (whenever possible). This is the balancing act that Clutch Masters has perfected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"FX250","offer_id":31770895286356,"sku":"clm20779-HD0F-D","price":1391.0,"currency_code":"USD","in_stock":true},{"title":"FX250R","offer_id":31960969838676,"sku":"clm20779-HD0F-R","price":1391.0,"currency_code":"USD","in_stock":true},{"title":"FX350","offer_id":31770895319124,"sku":"clm20779-HDFF-D","price":1391.0,"currency_code":"USD","in_stock":true},{"title":"FX350R","offer_id":31960971378772,"sku":"clm20779-HDFF-R","price":1391.0,"currency_code":"USD","in_stock":true},{"title":"FX400","offer_id":31960972722260,"sku":"clm20779-HDC6-D","price":1391.0,"currency_code":"USD","in_stock":true},{"title":"FX500","offer_id":31960974917716,"sku":"clm20779-HDB6-R","price":1391.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/FX250__66095.1425655524.1280.1280.jpg?v=1579618758"},{"product_id":"clutch-masters-steel-lightweight-flywheel-carrera-997-2","title":"Clutch Masters Steel Lightweight Flywheel (Carrera 997.2)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e2009 - 2012 Porsche 911 Carrera (3.6 and 3.8L)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNote: This is a special order item that ships directly from the manufacturer.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProduct Details:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClutch Masters Flywheels are designed and tested to ensure the safety and quality of every flywheel. Years of R\u0026amp;D has given us the knowledge and firsthand experience to choose wisely the best material to manufacture flywheels that will surpass your expectations. Depending on the application, the majority of Clutch Masters flywheels are made from 6061 T6 Billet Aluminum, 1045 or 4140 Billet Steel. Clutch Masters Flywheels are SFI Certified meeting performance standards for the automotive and motorsport industry. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of a Clutch Masters Light Weight flywheel:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight-weight for improved performance and Quicker Rev’s.\u003c\/li\u003e\n\u003cli\u003e(Aluminum Flywheels) Consist of a replaceable heat shield (friction surface), eliminating need to resurface flywheel.\u003c\/li\u003e\n\u003cli\u003eReduces turbo “lag” in turbo-charged engines.\u003c\/li\u003e\n\u003cli\u003eIncreased supercharger efficiency due to less drag on the crank.\u003c\/li\u003e\n\u003cli\u003eImproved mid-range torque in naturally aspirated engines.\u003c\/li\u003e\n\u003cli\u003eCNC Machined and balanced.\u003c\/li\u003e\n\u003cli\u003eSFI Certified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eA Dual Mass Flywheel (DMF) is a flywheel in two concentric parts or two facing flywheels stuck together with flexible compound to damp down transmitted vibration and gear rattle for the gear box. Many newer model vehicles now come standard with a factory DMF. Many times enthusiast choose to replace a DMF with a SMF and here is why:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eDMF’s tend to be more expensive than a SMF.\u003c\/li\u003e\n\u003cli\u003eDMF’s are not designed to be resurfaced like conventional SMF.\u003c\/li\u003e\n\u003cli\u003eDMF’s usually weigh 30+ lbs depending on the application which will cause unwanted turbo lag.\u003c\/li\u003e\n\u003cli\u003eDMF’s cannot withstand a high rate of abuse and may fail under spirited driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eBenefits of switching to a SMF: \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eReduced mass equals increased acceleration.\u003c\/li\u003e\n\u003cli\u003eReduces turbo “lag” in turbo-charged engines.\u003c\/li\u003e\n\u003cli\u003eIncreased supercharger efficiency due to less drag on the crank.\u003c\/li\u003e\n\u003cli\u003eImproved mid-range torque in naturally aspirated engines.\u003c\/li\u003e\n\u003cli\u003eSMF are able to be resurfaced and can be reused.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAbout Clutch Masters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/CM.jpg?v=1472158582\" alt=\"\" width=\"235\" height=\"83\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003eHigh Technology Makes the Difference\u003c\/div\u003e\n\u003cp\u003eHistorically, high performance clutches have been a compromise. While improving holding or clamping pressure, manufacturers nearly always increase pedal pressure to an uncomfortable point, especially for stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eBesides drivability concerns, additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear, leading to missed shifts, damaged clutch components, and even engine destruction.\u003c\/p\u003e\n\u003cp\u003eToday, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technique, Clutch Masters has increased clamping power, often without changing pedal pressure.\u003c\/p\u003e\n\u003cp\u003eExcessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.\u003c\/p\u003e\n\u003cp\u003eA clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.\u003c\/p\u003e\n\u003cdiv\u003eClamping Force vs. Pedal Pressure\u003c\/div\u003e\n\u003cp\u003eDesigning heavy duty and high performance clutches with a very high clamp load and incredible coefficient of friction is a fairly simple engineering task. To do so without increasing pedal pressure has not been so easy. Even the education process of changing opinions that an increase in pedal pressure must accompany a high performance clutch with increased clamping force has been difficult.\u003c\/p\u003e\n\u003cp\u003eClutch Masters, a premier manufacturer of fine quality clutches since 1976, has taken this experience and a clean sheet of paper to re-engineer their line of performance clutches to address these problems. The proof of this success is now available from Clutch Masters as a complete line of clutch systems for high performance street and racing use. It is the first major breakthrough in performance clutches in over four decades.\u003c\/p\u003e\n\u003cp\u003eFollowing are ways of increasing clamp load. The methods vary in sophistication and effectiveness:\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHeat Treating\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe diaphragm, or spring, is heat treated to increase spring tension for 10-40% more clamping force. This typically makes the diaphragm more brittle and more subject to premature failure. Many high performance clutch manufacturers use this procedure. Clutch Masters has perfected a more precise method of heat-treating its diaphragms to maintain consistent clamping force without compromising structural integrity.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDouble Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe double diaphragm is a method of increasing clamping force by stacking two diaphragms on top of each other. This will typically achieve the desired clamping force but will also increase the pedal pressure to a very high rate. For FX 500 and Multiple Disc set-ups, Clutch Masters uses two separate heat treating processes - one for each diaphragm - to ensure perfect compatibility between the two diaphragms. Additionally, there is a special friction-reducing material between the diaphragms to provide optimum clamping force while maintaining an ultra smooth operation.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThicker Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA thicker (than stock) diaphragm allows extra clamping force but is considered to be an on or off style clutch. Smooth engagement is severely compromised with the thick diaphragm due to the reduced elasticity of the thicker material. Clutch Masters does not use this technique.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHi-Leverage\u003csup\u003etm\u003c\/sup\u003e Pressure Plate\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy re-engineering the pressure plate leverage ring (moving it closer to the pivot point), Clutch Masters solves the clamping vs. pedal pressure problem in a unique way. By moving the pressure ring, Clutch Masters Hi-Leverage\u003csup\u003etm \u003c\/sup\u003ePressure Plates take mechanical advantage of the leverage principle. By moving the leverage ring closer to the pivot point, the pressure applied to the plate is increased significantly without unnecessarily increasing pedal pressure, as is typically the case in other clutches. This Hi-Leverage\u003csup\u003etm\u003c\/sup\u003efeature is unique to the high-performance clutch industry.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e***By combining these various methods of increasing clamping pressure with their re-engineered discs, Clutch Masters has developed a unique way of substantially increasing clutch performance without any of the negative side affects usually found in the typical high performance clutch.****\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Difference:\u003c\/p\u003e\n\u003cp\u003eClutch Masters clutches are true High Performance Clutch Systems and are technologically superior to anything currently on the market.\u003c\/p\u003e\n\u003cp\u003eTo develop a clutch with all the desired performance characteristics for intended applications is the challenge of a high performance clutch company. The Clutch Masters clutch system is unique in the industry. We use Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technology (refer to the Pressure Plate section) in our pressure plates, which significantly increases clamping force with no unnecessary increase in pedal pressure. Discs are designed either with reduced Marcel or a solid hub design to take advantage of our Hi-Leverage\u003csup\u003etm\u003c\/sup\u003epressure plate. The combination of these cutting edge technologies creates the finest clutch system on the market.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Clutch Masters, with over 35 years in the industry, has researched hundreds of friction materials and uses only the best materials available for each intended application. By combining the optimum clamping force with the finest friction materials - each with their own unique coefficient of friction - Clutch Masters has developed a line of clutches that provide ultimate performance in virtually any severe environment.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecific Purposes\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Clutch Masters clutches are specifically designed for varying stages of high performance and\/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition, Clutch Masters offers complete clutch systems.\u003c\/div\u003e\n\u003cp\u003eWhen the Class 30 Grey Iron material of a typical pressure plate is not suitable, Clutch Masters uses doubly strong Ductile Iron, which is the case with most CM clutches.\u003c\/p\u003e\n\u003cp\u003eThe friction material found on all OE discs and many high performance discs is simply riveted to the disc center section. Under severe use and\/or high RPM applications, the disc material can fragment and break apart, becoming dislodged from the disc center section. Once this occurs, the clutch has failed completely and is rendered inoperable. Clutch Masters has solved this common problem on their street and street\/strip discs by bonding a special steel backing plate (see disc technology and figure X) to the friction material. This unique feature provides significantly increased heat dissipation properties - heat is the #1 enemy of the clutch - and very high structural integrity to keep the disc intact under severe applications.\u003c\/p\u003e\n\u003cp\u003eRacing Only discs use solid center sections to give all the reliability and performance they need on the track. Warning: These solid hub discs are not meant for street applications as they transfer very high shock loads to the transmission, causing premature transmission failure, and will chatter upon starting from a stop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Weakest Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIn the battle of Man vs. Machine, whenever possible, engineers build into any given mechanical system a point of failure, or weak point, which is designed to wear or fail, therefore preventing damaging major components or even catastrophic failure of the entire system.\u003c\/div\u003e\n\u003cp\u003eIn the battle of Engine vs. Transmission, the clutch is designed to be that weak link. It is ultimately less expensive to replace a clutch than an engine or transmission. The challenge in building a high performance clutch is to build the unit for different intended heavy duty or severe applications which will hold the power; not break the transmission or internal engine components and retain an overall smooth operation of the entire system (whenever possible). This is the balancing act that Clutch Masters has perfected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"Default Title","offer_id":31961039929428,"sku":"clmFW-779-SF","price":1145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/971SFWM__47507.1440540346.1280.1280.jpg?v=1583425062"},{"product_id":"clutch-masters-aluminum-lightweight-flywheel-turbo-997-2","title":"Clutch Masters Aluminum Lightweight Flywheel (997 GT3 \/ Turbo)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\" mce-data-marked=\"1\"\u003e2005 - 2012 Porsche 911 Turbo \/ GT3 \/ GT2 (3.6L and 3.8L)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNote: This is a special order item that ships directly from the manufacturer.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProduct Details:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClutch Masters Flywheels are designed and tested to ensure the safety and quality of every flywheel. Years of R\u0026amp;D has given us the knowledge and firsthand experience to choose wisely the best material to manufacture flywheels that will surpass your expectations. Depending on the application, the majority of Clutch Masters flywheels are made from 6061 T6 Billet Aluminum, 1045 or 4140 Billet Steel. Clutch Masters Flywheels are SFI Certified meeting performance standards for the automotive and motorsport industry. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of a Clutch Masters Light Weight flywheel:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight-weight for improved performance and Quicker Rev’s.\u003c\/li\u003e\n\u003cli\u003e(Aluminum Flywheels) Consist of a replaceable heat shield (friction surface), eliminating need to resurface flywheel.\u003c\/li\u003e\n\u003cli\u003eReduces turbo “lag” in turbo-charged engines.\u003c\/li\u003e\n\u003cli\u003eIncreased supercharger efficiency due to less drag on the crank.\u003c\/li\u003e\n\u003cli\u003eImproved mid-range torque in naturally aspirated engines.\u003c\/li\u003e\n\u003cli\u003eCNC Machined and balanced.\u003c\/li\u003e\n\u003cli\u003eSFI Certified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv\u003eA Dual Mass Flywheel (DMF) is a flywheel in two concentric parts or two facing flywheels stuck together with flexible compound to damp down transmitted vibration and gear rattle for the gear box. Many newer model vehicles now come standard with a factory DMF. Many times enthusiast choose to replace a DMF with a SMF and here is why:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eDMF’s tend to be more expensive than a SMF.\u003c\/li\u003e\n\u003cli\u003eDMF’s are not designed to be resurfaced like conventional SMF.\u003c\/li\u003e\n\u003cli\u003eDMF’s usually weigh 30+ lbs depending on the application which will cause unwanted turbo lag.\u003c\/li\u003e\n\u003cli\u003eDMF’s cannot withstand a high rate of abuse and may fail under spirited driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eBenefits of switching to a SMF: \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eReduced mass equals increased acceleration.\u003c\/li\u003e\n\u003cli\u003eReduces turbo “lag” in turbo-charged engines.\u003c\/li\u003e\n\u003cli\u003eIncreased supercharger efficiency due to less drag on the crank.\u003c\/li\u003e\n\u003cli\u003eImproved mid-range torque in naturally aspirated engines.\u003c\/li\u003e\n\u003cli\u003eSMF are able to be resurfaced and can be reused.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn10.bigcommerce.com\/s-udd33uzq\/product_images\/uploaded_images\/aluminum-fw-banner-web.jpg?t=1574092412\" alt=\"aluminum-fw-banner-web.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAbout Clutch Masters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/CM.jpg?v=1472158582\" alt=\"\" width=\"235\" height=\"83\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003eHigh Technology Makes the Difference\u003c\/div\u003e\n\u003cp\u003eHistorically, high performance clutches have been a compromise. While improving holding or clamping pressure, manufacturers nearly always increase pedal pressure to an uncomfortable point, especially for stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eBesides drivability concerns, additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear, leading to missed shifts, damaged clutch components, and even engine destruction.\u003c\/p\u003e\n\u003cp\u003eToday, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technique, Clutch Masters has increased clamping power, often without changing pedal pressure.\u003c\/p\u003e\n\u003cp\u003eExcessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.\u003c\/p\u003e\n\u003cp\u003eA clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.\u003c\/p\u003e\n\u003cdiv\u003eClamping Force vs. Pedal Pressure\u003c\/div\u003e\n\u003cp\u003eDesigning heavy duty and high performance clutches with a very high clamp load and incredible coefficient of friction is a fairly simple engineering task. To do so without increasing pedal pressure has not been so easy. Even the education process of changing opinions that an increase in pedal pressure must accompany a high performance clutch with increased clamping force has been difficult.\u003c\/p\u003e\n\u003cp\u003eClutch Masters, a premier manufacturer of fine quality clutches since 1976, has taken this experience and a clean sheet of paper to re-engineer their line of performance clutches to address these problems. The proof of this success is now available from Clutch Masters as a complete line of clutch systems for high performance street and racing use. It is the first major breakthrough in performance clutches in over four decades.\u003c\/p\u003e\n\u003cp\u003eFollowing are ways of increasing clamp load. The methods vary in sophistication and effectiveness:\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHeat Treating\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe diaphragm, or spring, is heat treated to increase spring tension for 10-40% more clamping force. This typically makes the diaphragm more brittle and more subject to premature failure. Many high performance clutch manufacturers use this procedure. Clutch Masters has perfected a more precise method of heat-treating its diaphragms to maintain consistent clamping force without compromising structural integrity.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDouble Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe double diaphragm is a method of increasing clamping force by stacking two diaphragms on top of each other. This will typically achieve the desired clamping force but will also increase the pedal pressure to a very high rate. For FX 500 and Multiple Disc set-ups, Clutch Masters uses two separate heat treating processes - one for each diaphragm - to ensure perfect compatibility between the two diaphragms. Additionally, there is a special friction-reducing material between the diaphragms to provide optimum clamping force while maintaining an ultra smooth operation.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThicker Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA thicker (than stock) diaphragm allows extra clamping force but is considered to be an on or off style clutch. Smooth engagement is severely compromised with the thick diaphragm due to the reduced elasticity of the thicker material. Clutch Masters does not use this technique.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHi-Leverage\u003csup\u003etm\u003c\/sup\u003e Pressure Plate\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy re-engineering the pressure plate leverage ring (moving it closer to the pivot point), Clutch Masters solves the clamping vs. pedal pressure problem in a unique way. By moving the pressure ring, Clutch Masters Hi-Leverage\u003csup\u003etm \u003c\/sup\u003ePressure Plates take mechanical advantage of the leverage principle. By moving the leverage ring closer to the pivot point, the pressure applied to the plate is increased significantly without unnecessarily increasing pedal pressure, as is typically the case in other clutches. This Hi-Leverage\u003csup\u003etm\u003c\/sup\u003efeature is unique to the high-performance clutch industry.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e***By combining these various methods of increasing clamping pressure with their re-engineered discs, Clutch Masters has developed a unique way of substantially increasing clutch performance without any of the negative side affects usually found in the typical high performance clutch.****\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Difference:\u003c\/p\u003e\n\u003cp\u003eClutch Masters clutches are true High Performance Clutch Systems and are technologically superior to anything currently on the market.\u003c\/p\u003e\n\u003cp\u003eTo develop a clutch with all the desired performance characteristics for intended applications is the challenge of a high performance clutch company. The Clutch Masters clutch system is unique in the industry. We use Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technology (refer to the Pressure Plate section) in our pressure plates, which significantly increases clamping force with no unnecessary increase in pedal pressure. Discs are designed either with reduced Marcel or a solid hub design to take advantage of our Hi-Leverage\u003csup\u003etm\u003c\/sup\u003epressure plate. The combination of these cutting edge technologies creates the finest clutch system on the market.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Clutch Masters, with over 35 years in the industry, has researched hundreds of friction materials and uses only the best materials available for each intended application. By combining the optimum clamping force with the finest friction materials - each with their own unique coefficient of friction - Clutch Masters has developed a line of clutches that provide ultimate performance in virtually any severe environment.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecific Purposes\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Clutch Masters clutches are specifically designed for varying stages of high performance and\/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition, Clutch Masters offers complete clutch systems.\u003c\/div\u003e\n\u003cp\u003eWhen the Class 30 Grey Iron material of a typical pressure plate is not suitable, Clutch Masters uses doubly strong Ductile Iron, which is the case with most CM clutches.\u003c\/p\u003e\n\u003cp\u003eThe friction material found on all OE discs and many high performance discs is simply riveted to the disc center section. Under severe use and\/or high RPM applications, the disc material can fragment and break apart, becoming dislodged from the disc center section. Once this occurs, the clutch has failed completely and is rendered inoperable. Clutch Masters has solved this common problem on their street and street\/strip discs by bonding a special steel backing plate (see disc technology and figure X) to the friction material. This unique feature provides significantly increased heat dissipation properties - heat is the #1 enemy of the clutch - and very high structural integrity to keep the disc intact under severe applications.\u003c\/p\u003e\n\u003cp\u003eRacing Only discs use solid center sections to give all the reliability and performance they need on the track. Warning: These solid hub discs are not meant for street applications as they transfer very high shock loads to the transmission, causing premature transmission failure, and will chatter upon starting from a stop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Weakest Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIn the battle of Man vs. Machine, whenever possible, engineers build into any given mechanical system a point of failure, or weak point, which is designed to wear or fail, therefore preventing damaging major components or even catastrophic failure of the entire system.\u003c\/div\u003e\n\u003cp\u003eIn the battle of Engine vs. Transmission, the clutch is designed to be that weak link. It is ultimately less expensive to replace a clutch than an engine or transmission. The challenge in building a high performance clutch is to build the unit for different intended heavy duty or severe applications which will hold the power; not break the transmission or internal engine components and retain an overall smooth operation of the entire system (whenever possible). This is the balancing act that Clutch Masters has perfected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"Default Title","offer_id":31961153142868,"sku":"clmFW-934-AL","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/934ALWM__26473.1435333588.480.480.jpg?v=1583426353"},{"product_id":"clutch-masters-aluminum-lightweight-flywheel-996-gt3-turbo","title":"Clutch Masters Aluminum Lightweight Flywheel (996 GT3 \/ Turbo)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e2001 - 2004 Porsche 911 Turbo \/ GT3 \/ GT2 (3.6L and 3.8L)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNote: This is a special order item that ships directly from the manufacturer.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProduct Details:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClutch Masters Flywheels are designed and tested to ensure the safety and quality of every flywheel. Years of R\u0026amp;D has given us the knowledge and firsthand experience to choose wisely the best material to manufacture flywheels that will surpass your expectations. Depending on the application, the majority of Clutch Masters flywheels are made from 6061 T6 Billet Aluminum, 1045 or 4140 Billet Steel. Clutch Masters Flywheels are SFI Certified meeting performance standards for the automotive and motorsport industry. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits of a Clutch Masters Light Weight flywheel:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight-weight for improved performance and Quicker Rev’s.\u003c\/li\u003e\n\u003cli\u003e(Aluminum Flywheels) Consist of a replaceable heat shield (friction surface), eliminating need to resurface flywheel.\u003c\/li\u003e\n\u003cli\u003eReduces turbo “lag” in turbo-charged engines.\u003c\/li\u003e\n\u003cli\u003eIncreased supercharger efficiency due to less drag on the crank.\u003c\/li\u003e\n\u003cli\u003eImproved mid-range torque in naturally aspirated engines.\u003c\/li\u003e\n\u003cli\u003eCNC Machined and balanced.\u003c\/li\u003e\n\u003cli\u003eSFI Certified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv\u003eA Dual Mass Flywheel (DMF) is a flywheel in two concentric parts or two facing flywheels stuck together with flexible compound to damp down transmitted vibration and gear rattle for the gear box. Many newer model vehicles now come standard with a factory DMF. Many times enthusiast choose to replace a DMF with a SMF and here is why:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eDMF’s tend to be more expensive than a SMF.\u003c\/li\u003e\n\u003cli\u003eDMF’s are not designed to be resurfaced like conventional SMF.\u003c\/li\u003e\n\u003cli\u003eDMF’s usually weigh 30+ lbs depending on the application which will cause unwanted turbo lag.\u003c\/li\u003e\n\u003cli\u003eDMF’s cannot withstand a high rate of abuse and may fail under spirited driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eBenefits of switching to a SMF: \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eReduced mass equals increased acceleration.\u003c\/li\u003e\n\u003cli\u003eReduces turbo “lag” in turbo-charged engines.\u003c\/li\u003e\n\u003cli\u003eIncreased supercharger efficiency due to less drag on the crank.\u003c\/li\u003e\n\u003cli\u003eImproved mid-range torque in naturally aspirated engines.\u003c\/li\u003e\n\u003cli\u003eSMF are able to be resurfaced and can be reused.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn10.bigcommerce.com\/s-udd33uzq\/product_images\/uploaded_images\/aluminum-fw-banner-web.jpg?t=1574092412\" alt=\"aluminum-fw-banner-web.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAbout Clutch Masters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/CM.jpg?v=1472158582\" alt=\"\" width=\"235\" height=\"83\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003eHigh Technology Makes the Difference\u003c\/div\u003e\n\u003cp\u003eHistorically, high performance clutches have been a compromise. While improving holding or clamping pressure, manufacturers nearly always increase pedal pressure to an uncomfortable point, especially for stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eBesides drivability concerns, additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear, leading to missed shifts, damaged clutch components, and even engine destruction.\u003c\/p\u003e\n\u003cp\u003eToday, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technique, Clutch Masters has increased clamping power, often without changing pedal pressure.\u003c\/p\u003e\n\u003cp\u003eExcessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.\u003c\/p\u003e\n\u003cp\u003eA clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.\u003c\/p\u003e\n\u003cdiv\u003eClamping Force vs. Pedal Pressure\u003c\/div\u003e\n\u003cp\u003eDesigning heavy duty and high performance clutches with a very high clamp load and incredible coefficient of friction is a fairly simple engineering task. To do so without increasing pedal pressure has not been so easy. Even the education process of changing opinions that an increase in pedal pressure must accompany a high performance clutch with increased clamping force has been difficult.\u003c\/p\u003e\n\u003cp\u003eClutch Masters, a premier manufacturer of fine quality clutches since 1976, has taken this experience and a clean sheet of paper to re-engineer their line of performance clutches to address these problems. The proof of this success is now available from Clutch Masters as a complete line of clutch systems for high performance street and racing use. It is the first major breakthrough in performance clutches in over four decades.\u003c\/p\u003e\n\u003cp\u003eFollowing are ways of increasing clamp load. The methods vary in sophistication and effectiveness:\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHeat Treating\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe diaphragm, or spring, is heat treated to increase spring tension for 10-40% more clamping force. This typically makes the diaphragm more brittle and more subject to premature failure. Many high performance clutch manufacturers use this procedure. Clutch Masters has perfected a more precise method of heat-treating its diaphragms to maintain consistent clamping force without compromising structural integrity.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDouble Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe double diaphragm is a method of increasing clamping force by stacking two diaphragms on top of each other. This will typically achieve the desired clamping force but will also increase the pedal pressure to a very high rate. For FX 500 and Multiple Disc set-ups, Clutch Masters uses two separate heat treating processes - one for each diaphragm - to ensure perfect compatibility between the two diaphragms. Additionally, there is a special friction-reducing material between the diaphragms to provide optimum clamping force while maintaining an ultra smooth operation.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThicker Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA thicker (than stock) diaphragm allows extra clamping force but is considered to be an on or off style clutch. Smooth engagement is severely compromised with the thick diaphragm due to the reduced elasticity of the thicker material. Clutch Masters does not use this technique.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHi-Leverage\u003csup\u003etm\u003c\/sup\u003e Pressure Plate\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy re-engineering the pressure plate leverage ring (moving it closer to the pivot point), Clutch Masters solves the clamping vs. pedal pressure problem in a unique way. By moving the pressure ring, Clutch Masters Hi-Leverage\u003csup\u003etm \u003c\/sup\u003ePressure Plates take mechanical advantage of the leverage principle. By moving the leverage ring closer to the pivot point, the pressure applied to the plate is increased significantly without unnecessarily increasing pedal pressure, as is typically the case in other clutches. This Hi-Leverage\u003csup\u003etm\u003c\/sup\u003efeature is unique to the high-performance clutch industry.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e***By combining these various methods of increasing clamping pressure with their re-engineered discs, Clutch Masters has developed a unique way of substantially increasing clutch performance without any of the negative side affects usually found in the typical high performance clutch.****\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Difference:\u003c\/p\u003e\n\u003cp\u003eClutch Masters clutches are true High Performance Clutch Systems and are technologically superior to anything currently on the market.\u003c\/p\u003e\n\u003cp\u003eTo develop a clutch with all the desired performance characteristics for intended applications is the challenge of a high performance clutch company. The Clutch Masters clutch system is unique in the industry. We use Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technology (refer to the Pressure Plate section) in our pressure plates, which significantly increases clamping force with no unnecessary increase in pedal pressure. Discs are designed either with reduced Marcel or a solid hub design to take advantage of our Hi-Leverage\u003csup\u003etm\u003c\/sup\u003epressure plate. The combination of these cutting edge technologies creates the finest clutch system on the market.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Clutch Masters, with over 35 years in the industry, has researched hundreds of friction materials and uses only the best materials available for each intended application. By combining the optimum clamping force with the finest friction materials - each with their own unique coefficient of friction - Clutch Masters has developed a line of clutches that provide ultimate performance in virtually any severe environment.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecific Purposes\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Clutch Masters clutches are specifically designed for varying stages of high performance and\/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition, Clutch Masters offers complete clutch systems.\u003c\/div\u003e\n\u003cp\u003eWhen the Class 30 Grey Iron material of a typical pressure plate is not suitable, Clutch Masters uses doubly strong Ductile Iron, which is the case with most CM clutches.\u003c\/p\u003e\n\u003cp\u003eThe friction material found on all OE discs and many high performance discs is simply riveted to the disc center section. Under severe use and\/or high RPM applications, the disc material can fragment and break apart, becoming dislodged from the disc center section. Once this occurs, the clutch has failed completely and is rendered inoperable. Clutch Masters has solved this common problem on their street and street\/strip discs by bonding a special steel backing plate (see disc technology and figure X) to the friction material. This unique feature provides significantly increased heat dissipation properties - heat is the #1 enemy of the clutch - and very high structural integrity to keep the disc intact under severe applications.\u003c\/p\u003e\n\u003cp\u003eRacing Only discs use solid center sections to give all the reliability and performance they need on the track. Warning: These solid hub discs are not meant for street applications as they transfer very high shock loads to the transmission, causing premature transmission failure, and will chatter upon starting from a stop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Weakest Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIn the battle of Man vs. Machine, whenever possible, engineers build into any given mechanical system a point of failure, or weak point, which is designed to wear or fail, therefore preventing damaging major components or even catastrophic failure of the entire system.\u003c\/div\u003e\n\u003cp\u003eIn the battle of Engine vs. Transmission, the clutch is designed to be that weak link. It is ultimately less expensive to replace a clutch than an engine or transmission. The challenge in building a high performance clutch is to build the unit for different intended heavy duty or severe applications which will hold the power; not break the transmission or internal engine components and retain an overall smooth operation of the entire system (whenever possible). This is the balancing act that Clutch Masters has perfected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"Default Title","offer_id":31961255182420,"sku":"clmFW-934-AL","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/934ALWM__26473.1435333588.480.480_0212d910-8be0-49ef-84f5-b89656901066.jpg?v=1583428248"},{"product_id":"clutch-masters-fx250-clutch-kit-997-gt3-turbo","title":"Clutch Masters FX Series Clutch Kit (997 GT3 \u0026 Turbo)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e2005 - 2012 Porsche 911 Turbo \u0026amp; GT3 \/ GT2 (3.6 and 3.8L)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eNote: This is a special order item that ships directly from the manufacturer.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProduct Details:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for.\u003c\/p\u003e\n\u003cp\u003eNote, the 250R, 350R, and FX500 kits all feature an unsprung clutch disc, meant for race use only in combination with a Single Mass Flywheel, also available from Clutchmasters.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eKit Includes\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePressure Plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eClutch Disc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eThrow-out Bearing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePilot Bearing or Bushing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAlignment Tool\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFX100 - STREET - 70% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFX250 - STREET- 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFX350 - STREET\/RACE - 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFX400 - RACE\/STREET - 170% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFX500 - RACE USE ONLY - 200% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAbout Clutch Masters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/CM.jpg?v=1472158582\" alt=\"\" width=\"235\" height=\"83\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003eHigh Technology Makes the Difference\u003c\/div\u003e\n\u003cp\u003eHistorically, high performance clutches have been a compromise. While improving holding or clamping pressure, manufacturers nearly always increase pedal pressure to an uncomfortable point, especially for stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eBesides drivability concerns, additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear, leading to missed shifts, damaged clutch components, and even engine destruction.\u003c\/p\u003e\n\u003cp\u003eToday, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technique, Clutch Masters has increased clamping power, often without changing pedal pressure.\u003c\/p\u003e\n\u003cp\u003eExcessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.\u003c\/p\u003e\n\u003cp\u003eA clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.\u003c\/p\u003e\n\u003cdiv\u003eClamping Force vs. Pedal Pressure\u003c\/div\u003e\n\u003cp\u003eDesigning heavy duty and high performance clutches with a very high clamp load and incredible coefficient of friction is a fairly simple engineering task. To do so without increasing pedal pressure has not been so easy. Even the education process of changing opinions that an increase in pedal pressure must accompany a high performance clutch with increased clamping force has been difficult.\u003c\/p\u003e\n\u003cp\u003eClutch Masters, a premier manufacturer of fine quality clutches since 1976, has taken this experience and a clean sheet of paper to re-engineer their line of performance clutches to address these problems. The proof of this success is now available from Clutch Masters as a complete line of clutch systems for high performance street and racing use. It is the first major breakthrough in performance clutches in over four decades.\u003c\/p\u003e\n\u003cp\u003eFollowing are ways of increasing clamp load. The methods vary in sophistication and effectiveness:\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHeat Treating\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe diaphragm, or spring, is heat treated to increase spring tension for 10-40% more clamping force. This typically makes the diaphragm more brittle and more subject to premature failure. Many high performance clutch manufacturers use this procedure. Clutch Masters has perfected a more precise method of heat-treating its diaphragms to maintain consistent clamping force without compromising structural integrity.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDouble Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe double diaphragm is a method of increasing clamping force by stacking two diaphragms on top of each other. This will typically achieve the desired clamping force but will also increase the pedal pressure to a very high rate. For FX 500 and Multiple Disc set-ups, Clutch Masters uses two separate heat treating processes - one for each diaphragm - to ensure perfect compatibility between the two diaphragms. Additionally, there is a special friction-reducing material between the diaphragms to provide optimum clamping force while maintaining an ultra smooth operation.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThicker Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA thicker (than stock) diaphragm allows extra clamping force but is considered to be an on or off style clutch. Smooth engagement is severely compromised with the thick diaphragm due to the reduced elasticity of the thicker material. Clutch Masters does not use this technique.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHi-Leverage\u003csup\u003etm\u003c\/sup\u003e Pressure Plate\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy re-engineering the pressure plate leverage ring (moving it closer to the pivot point), Clutch Masters solves the clamping vs. pedal pressure problem in a unique way. By moving the pressure ring, Clutch Masters Hi-Leverage\u003csup\u003etm \u003c\/sup\u003ePressure Plates take mechanical advantage of the leverage principle. By moving the leverage ring closer to the pivot point, the pressure applied to the plate is increased significantly without unnecessarily increasing pedal pressure, as is typically the case in other clutches. This Hi-Leverage\u003csup\u003etm\u003c\/sup\u003efeature is unique to the high-performance clutch industry.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e***By combining these various methods of increasing clamping pressure with their re-engineered discs, Clutch Masters has developed a unique way of substantially increasing clutch performance without any of the negative side affects usually found in the typical high performance clutch.****\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Difference:\u003c\/p\u003e\n\u003cp\u003eClutch Masters clutches are true High Performance Clutch Systems and are technologically superior to anything currently on the market.\u003c\/p\u003e\n\u003cp\u003eTo develop a clutch with all the desired performance characteristics for intended applications is the challenge of a high performance clutch company. The Clutch Masters clutch system is unique in the industry. We use Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technology (refer to the Pressure Plate section) in our pressure plates, which significantly increases clamping force with no unnecessary increase in pedal pressure. Discs are designed either with reduced Marcel or a solid hub design to take advantage of our Hi-Leverage\u003csup\u003etm\u003c\/sup\u003epressure plate. The combination of these cutting edge technologies creates the finest clutch system on the market.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Clutch Masters, with over 35 years in the industry, has researched hundreds of friction materials and uses only the best materials available for each intended application. By combining the optimum clamping force with the finest friction materials - each with their own unique coefficient of friction - Clutch Masters has developed a line of clutches that provide ultimate performance in virtually any severe environment.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecific Purposes\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Clutch Masters clutches are specifically designed for varying stages of high performance and\/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition, Clutch Masters offers complete clutch systems.\u003c\/div\u003e\n\u003cp\u003eWhen the Class 30 Grey Iron material of a typical pressure plate is not suitable, Clutch Masters uses doubly strong Ductile Iron, which is the case with most CM clutches.\u003c\/p\u003e\n\u003cp\u003eThe friction material found on all OE discs and many high performance discs is simply riveted to the disc center section. Under severe use and\/or high RPM applications, the disc material can fragment and break apart, becoming dislodged from the disc center section. Once this occurs, the clutch has failed completely and is rendered inoperable. Clutch Masters has solved this common problem on their street and street\/strip discs by bonding a special steel backing plate (see disc technology and figure X) to the friction material. This unique feature provides significantly increased heat dissipation properties - heat is the #1 enemy of the clutch - and very high structural integrity to keep the disc intact under severe applications.\u003c\/p\u003e\n\u003cp\u003eRacing Only discs use solid center sections to give all the reliability and performance they need on the track. Warning: These solid hub discs are not meant for street applications as they transfer very high shock loads to the transmission, causing premature transmission failure, and will chatter upon starting from a stop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Weakest Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIn the battle of Man vs. Machine, whenever possible, engineers build into any given mechanical system a point of failure, or weak point, which is designed to wear or fail, therefore preventing damaging major components or even catastrophic failure of the entire system.\u003c\/div\u003e\n\u003cp\u003eIn the battle of Engine vs. Transmission, the clutch is designed to be that weak link. It is ultimately less expensive to replace a clutch than an engine or transmission. The challenge in building a high performance clutch is to build the unit for different intended heavy duty or severe applications which will hold the power; not break the transmission or internal engine components and retain an overall smooth operation of the entire system (whenever possible). This is the balancing act that Clutch Masters has perfected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"FX250","offer_id":31961318228052,"sku":"clm20934-HD0F","price":2062.0,"currency_code":"USD","in_stock":true},{"title":"FX350","offer_id":31961318293588,"sku":"clm20934-HDFF","price":2062.0,"currency_code":"USD","in_stock":true},{"title":"FX400","offer_id":31961318359124,"sku":"clm20934-HDCL","price":2062.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/FX250__66095.1425655524.1280.1280_e4ee1016-ea97-482a-85db-9275ccafd3ea.jpg?v=1583429513"},{"product_id":"clutch-masters-fx-series-clutch-kit-987-2-boxster","title":"Clutch Masters FX Series Clutch Kit (987 Boxster)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2005 - 2008 Porsche Boxster S (3.2L and 3.4L, not DFI engines)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e2009 - 2012 Porsche Boxster (2.9L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProduct Details:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for.\u003c\/p\u003e\n\u003cp\u003eNote, the 250R, 350R, and FX500 kits all feature an unsprung clutch disc, meant for race use only in combination with a Single Mass Flywheel, also available from Clutchmasters.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eKit Includes\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePressure Plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eClutch Disc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eThrow-out Bearing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePilot Bearing or Bushing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAlignment Tool\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFX100 - STREET - 70% Increased holding capacity\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX250 - STREET- 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX350 - STREET\/RACE - 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX400 - RACE\/STREET - 170% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX500 - RACE USE ONLY - 200% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAbout Clutch Masters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/CM.jpg?v=1472158582\" alt=\"\" width=\"235\" height=\"83\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003eHigh Technology Makes the Difference\u003c\/div\u003e\n\u003cp\u003eHistorically, high performance clutches have been a compromise. While improving holding or clamping pressure, manufacturers nearly always increase pedal pressure to an uncomfortable point, especially for stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eBesides drivability concerns, additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear, leading to missed shifts, damaged clutch components, and even engine destruction.\u003c\/p\u003e\n\u003cp\u003eToday, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technique, Clutch Masters has increased clamping power, often without changing pedal pressure.\u003c\/p\u003e\n\u003cp\u003eExcessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.\u003c\/p\u003e\n\u003cp\u003eA clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.\u003c\/p\u003e\n\u003cdiv\u003eClamping Force vs. Pedal Pressure\u003c\/div\u003e\n\u003cp\u003eDesigning heavy duty and high performance clutches with a very high clamp load and incredible coefficient of friction is a fairly simple engineering task. To do so without increasing pedal pressure has not been so easy. Even the education process of changing opinions that an increase in pedal pressure must accompany a high performance clutch with increased clamping force has been difficult.\u003c\/p\u003e\n\u003cp\u003eClutch Masters, a premier manufacturer of fine quality clutches since 1976, has taken this experience and a clean sheet of paper to re-engineer their line of performance clutches to address these problems. The proof of this success is now available from Clutch Masters as a complete line of clutch systems for high performance street and racing use. It is the first major breakthrough in performance clutches in over four decades.\u003c\/p\u003e\n\u003cp\u003eFollowing are ways of increasing clamp load. The methods vary in sophistication and effectiveness:\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHeat Treating\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe diaphragm, or spring, is heat treated to increase spring tension for 10-40% more clamping force. This typically makes the diaphragm more brittle and more subject to premature failure. Many high performance clutch manufacturers use this procedure. Clutch Masters has perfected a more precise method of heat-treating its diaphragms to maintain consistent clamping force without compromising structural integrity.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDouble Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe double diaphragm is a method of increasing clamping force by stacking two diaphragms on top of each other. This will typically achieve the desired clamping force but will also increase the pedal pressure to a very high rate. For FX 500 and Multiple Disc set-ups, Clutch Masters uses two separate heat treating processes - one for each diaphragm - to ensure perfect compatibility between the two diaphragms. Additionally, there is a special friction-reducing material between the diaphragms to provide optimum clamping force while maintaining an ultra smooth operation.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThicker Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA thicker (than stock) diaphragm allows extra clamping force but is considered to be an on or off style clutch. Smooth engagement is severely compromised with the thick diaphragm due to the reduced elasticity of the thicker material. Clutch Masters does not use this technique.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHi-Leverage\u003csup\u003etm\u003c\/sup\u003e Pressure Plate\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy re-engineering the pressure plate leverage ring (moving it closer to the pivot point), Clutch Masters solves the clamping vs. pedal pressure problem in a unique way. By moving the pressure ring, Clutch Masters Hi-Leverage\u003csup\u003etm \u003c\/sup\u003ePressure Plates take mechanical advantage of the leverage principle. By moving the leverage ring closer to the pivot point, the pressure applied to the plate is increased significantly without unnecessarily increasing pedal pressure, as is typically the case in other clutches. This Hi-Leverage\u003csup\u003etm\u003c\/sup\u003efeature is unique to the high-performance clutch industry.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e***By combining these various methods of increasing clamping pressure with their re-engineered discs, Clutch Masters has developed a unique way of substantially increasing clutch performance without any of the negative side affects usually found in the typical high performance clutch.****\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Difference:\u003c\/p\u003e\n\u003cp\u003eClutch Masters clutches are true High Performance Clutch Systems and are technologically superior to anything currently on the market.\u003c\/p\u003e\n\u003cp\u003eTo develop a clutch with all the desired performance characteristics for intended applications is the challenge of a high performance clutch company. The Clutch Masters clutch system is unique in the industry. We use Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technology (refer to the Pressure Plate section) in our pressure plates, which significantly increases clamping force with no unnecessary increase in pedal pressure. Discs are designed either with reduced Marcel or a solid hub design to take advantage of our Hi-Leverage\u003csup\u003etm\u003c\/sup\u003epressure plate. The combination of these cutting edge technologies creates the finest clutch system on the market.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Clutch Masters, with over 35 years in the industry, has researched hundreds of friction materials and uses only the best materials available for each intended application. By combining the optimum clamping force with the finest friction materials - each with their own unique coefficient of friction - Clutch Masters has developed a line of clutches that provide ultimate performance in virtually any severe environment.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecific Purposes\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Clutch Masters clutches are specifically designed for varying stages of high performance and\/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition, Clutch Masters offers complete clutch systems.\u003c\/div\u003e\n\u003cp\u003eWhen the Class 30 Grey Iron material of a typical pressure plate is not suitable, Clutch Masters uses doubly strong Ductile Iron, which is the case with most CM clutches.\u003c\/p\u003e\n\u003cp\u003eThe friction material found on all OE discs and many high performance discs is simply riveted to the disc center section. Under severe use and\/or high RPM applications, the disc material can fragment and break apart, becoming dislodged from the disc center section. Once this occurs, the clutch has failed completely and is rendered inoperable. Clutch Masters has solved this common problem on their street and street\/strip discs by bonding a special steel backing plate (see disc technology and figure X) to the friction material. This unique feature provides significantly increased heat dissipation properties - heat is the #1 enemy of the clutch - and very high structural integrity to keep the disc intact under severe applications.\u003c\/p\u003e\n\u003cp\u003eRacing Only discs use solid center sections to give all the reliability and performance they need on the track. Warning: These solid hub discs are not meant for street applications as they transfer very high shock loads to the transmission, causing premature transmission failure, and will chatter upon starting from a stop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Weakest Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIn the battle of Man vs. Machine, whenever possible, engineers build into any given mechanical system a point of failure, or weak point, which is designed to wear or fail, therefore preventing damaging major components or even catastrophic failure of the entire system.\u003c\/div\u003e\n\u003cp\u003eIn the battle of Engine vs. Transmission, the clutch is designed to be that weak link. It is ultimately less expensive to replace a clutch than an engine or transmission. The challenge in building a high performance clutch is to build the unit for different intended heavy duty or severe applications which will hold the power; not break the transmission or internal engine components and retain an overall smooth operation of the entire system (whenever possible). This is the balancing act that Clutch Masters has perfected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"FX250","offer_id":31962226131028,"sku":"clm20808-HD0F-D","price":1237.0,"currency_code":"USD","in_stock":true},{"title":"FX250R","offer_id":31962226163796,"sku":"clm20808-HD0F-R","price":1237.0,"currency_code":"USD","in_stock":true},{"title":"FX350","offer_id":31962226196564,"sku":"clm20808-HRFF-D","price":1237.0,"currency_code":"USD","in_stock":true},{"title":"FX350R","offer_id":31962226229332,"sku":"clm20808-HDFF-R","price":1237.0,"currency_code":"USD","in_stock":true},{"title":"FX400","offer_id":31962226262100,"sku":"clm20808-HDC6-D","price":1237.0,"currency_code":"USD","in_stock":true},{"title":"FX500","offer_id":31962226294868,"sku":"clm20808-HDB6-R","price":1237.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/e513a057-3641-4f11-998f-c3622da42d2a-420_f5c62c5b-0520-4b5d-aa46-a37570529bf2.jpg?v=1583443772"},{"product_id":"clutch-masters-fx-series-clutch-kit-987-2-cayman-boxster","title":"Clutch Masters FX Series Clutch Kit (987.2 Cayman \u0026 Boxster S)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2009 - 2012 Porsche Cayman S \u0026amp; Boxster S (3.4L DFI Engines Only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProduct Details:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for.\u003c\/p\u003e\n\u003cp\u003eNote, the 250R, 350R, and FX500 kits all feature an unsprung clutch disc, meant for race use only in combination with a Single Mass Flywheel, also available from Clutchmasters.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.4;\"\u003eKit Includes\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePressure Plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eClutch Disc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eThrow-out Bearing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003ePilot Bearing or Bushing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAlignment Tool\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFX100 - STREET - 70% Increased holding capacity\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX250 - STREET- 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX350 - STREET\/RACE - 110% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX400 - RACE\/STREET - 170% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFX500 - RACE USE ONLY - 200% Increased holding capacity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAbout Clutch Masters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/CM.jpg?v=1472158582\" alt=\"\" width=\"235\" height=\"83\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003eHigh Technology Makes the Difference\u003c\/div\u003e\n\u003cp\u003eHistorically, high performance clutches have been a compromise. While improving holding or clamping pressure, manufacturers nearly always increase pedal pressure to an uncomfortable point, especially for stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eBesides drivability concerns, additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear, leading to missed shifts, damaged clutch components, and even engine destruction.\u003c\/p\u003e\n\u003cp\u003eToday, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technique, Clutch Masters has increased clamping power, often without changing pedal pressure.\u003c\/p\u003e\n\u003cp\u003eExcessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.\u003c\/p\u003e\n\u003cp\u003eA clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.\u003c\/p\u003e\n\u003cdiv\u003eClamping Force vs. Pedal Pressure\u003c\/div\u003e\n\u003cp\u003eDesigning heavy duty and high performance clutches with a very high clamp load and incredible coefficient of friction is a fairly simple engineering task. To do so without increasing pedal pressure has not been so easy. Even the education process of changing opinions that an increase in pedal pressure must accompany a high performance clutch with increased clamping force has been difficult.\u003c\/p\u003e\n\u003cp\u003eClutch Masters, a premier manufacturer of fine quality clutches since 1976, has taken this experience and a clean sheet of paper to re-engineer their line of performance clutches to address these problems. The proof of this success is now available from Clutch Masters as a complete line of clutch systems for high performance street and racing use. It is the first major breakthrough in performance clutches in over four decades.\u003c\/p\u003e\n\u003cp\u003eFollowing are ways of increasing clamp load. The methods vary in sophistication and effectiveness:\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHeat Treating\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe diaphragm, or spring, is heat treated to increase spring tension for 10-40% more clamping force. This typically makes the diaphragm more brittle and more subject to premature failure. Many high performance clutch manufacturers use this procedure. Clutch Masters has perfected a more precise method of heat-treating its diaphragms to maintain consistent clamping force without compromising structural integrity.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDouble Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe double diaphragm is a method of increasing clamping force by stacking two diaphragms on top of each other. This will typically achieve the desired clamping force but will also increase the pedal pressure to a very high rate. For FX 500 and Multiple Disc set-ups, Clutch Masters uses two separate heat treating processes - one for each diaphragm - to ensure perfect compatibility between the two diaphragms. Additionally, there is a special friction-reducing material between the diaphragms to provide optimum clamping force while maintaining an ultra smooth operation.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThicker Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA thicker (than stock) diaphragm allows extra clamping force but is considered to be an on or off style clutch. Smooth engagement is severely compromised with the thick diaphragm due to the reduced elasticity of the thicker material. Clutch Masters does not use this technique.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHi-Leverage\u003csup\u003etm\u003c\/sup\u003e Pressure Plate\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy re-engineering the pressure plate leverage ring (moving it closer to the pivot point), Clutch Masters solves the clamping vs. pedal pressure problem in a unique way. By moving the pressure ring, Clutch Masters Hi-Leverage\u003csup\u003etm \u003c\/sup\u003ePressure Plates take mechanical advantage of the leverage principle. By moving the leverage ring closer to the pivot point, the pressure applied to the plate is increased significantly without unnecessarily increasing pedal pressure, as is typically the case in other clutches. This Hi-Leverage\u003csup\u003etm\u003c\/sup\u003efeature is unique to the high-performance clutch industry.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e***By combining these various methods of increasing clamping pressure with their re-engineered discs, Clutch Masters has developed a unique way of substantially increasing clutch performance without any of the negative side affects usually found in the typical high performance clutch.****\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Difference:\u003c\/p\u003e\n\u003cp\u003eClutch Masters clutches are true High Performance Clutch Systems and are technologically superior to anything currently on the market.\u003c\/p\u003e\n\u003cp\u003eTo develop a clutch with all the desired performance characteristics for intended applications is the challenge of a high performance clutch company. The Clutch Masters clutch system is unique in the industry. We use Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technology (refer to the Pressure Plate section) in our pressure plates, which significantly increases clamping force with no unnecessary increase in pedal pressure. Discs are designed either with reduced Marcel or a solid hub design to take advantage of our Hi-Leverage\u003csup\u003etm\u003c\/sup\u003epressure plate. The combination of these cutting edge technologies creates the finest clutch system on the market.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Clutch Masters, with over 35 years in the industry, has researched hundreds of friction materials and uses only the best materials available for each intended application. By combining the optimum clamping force with the finest friction materials - each with their own unique coefficient of friction - Clutch Masters has developed a line of clutches that provide ultimate performance in virtually any severe environment.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecific Purposes\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Clutch Masters clutches are specifically designed for varying stages of high performance and\/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition, Clutch Masters offers complete clutch systems.\u003c\/div\u003e\n\u003cp\u003eWhen the Class 30 Grey Iron material of a typical pressure plate is not suitable, Clutch Masters uses doubly strong Ductile Iron, which is the case with most CM clutches.\u003c\/p\u003e\n\u003cp\u003eThe friction material found on all OE discs and many high performance discs is simply riveted to the disc center section. Under severe use and\/or high RPM applications, the disc material can fragment and break apart, becoming dislodged from the disc center section. Once this occurs, the clutch has failed completely and is rendered inoperable. Clutch Masters has solved this common problem on their street and street\/strip discs by bonding a special steel backing plate (see disc technology and figure X) to the friction material. This unique feature provides significantly increased heat dissipation properties - heat is the #1 enemy of the clutch - and very high structural integrity to keep the disc intact under severe applications.\u003c\/p\u003e\n\u003cp\u003eRacing Only discs use solid center sections to give all the reliability and performance they need on the track. Warning: These solid hub discs are not meant for street applications as they transfer very high shock loads to the transmission, causing premature transmission failure, and will chatter upon starting from a stop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Weakest Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIn the battle of Man vs. Machine, whenever possible, engineers build into any given mechanical system a point of failure, or weak point, which is designed to wear or fail, therefore preventing damaging major components or even catastrophic failure of the entire system.\u003c\/div\u003e\n\u003cp\u003eIn the battle of Engine vs. Transmission, the clutch is designed to be that weak link. It is ultimately less expensive to replace a clutch than an engine or transmission. The challenge in building a high performance clutch is to build the unit for different intended heavy duty or severe applications which will hold the power; not break the transmission or internal engine components and retain an overall smooth operation of the entire system (whenever possible). This is the balancing act that Clutch Masters has perfected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"FX250R","offer_id":31962258833492,"sku":"clm20971-HD0F-R","price":1391.0,"currency_code":"USD","in_stock":true},{"title":"FX350","offer_id":31962258866260,"sku":"clm20971-HDFF-D","price":1391.0,"currency_code":"USD","in_stock":true},{"title":"FX350R","offer_id":31962258899028,"sku":"clm20971-HDFF-R","price":1391.0,"currency_code":"USD","in_stock":true},{"title":"FX400","offer_id":31962258931796,"sku":"clm20971-HDC6-D","price":1391.0,"currency_code":"USD","in_stock":true},{"title":"FX500","offer_id":31962258964564,"sku":"clm20971-HDB6-R","price":1391.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/e513a057-3641-4f11-998f-c3622da42d2a-420_8d4dcbb1-4a9a-4155-a49d-e5c1c1e5b341.jpg?v=1583444589"},{"product_id":"clutch-masters-aluminum-lightweight-flywheel-997-carrera","title":"Clutch Masters Aluminum Lightweight Flywheel (997.1 Carrera)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\" mce-data-marked=\"1\"\u003e2005 - 2008 Porsche 911 Carrera \/ Carrera S (3.6L and 3.8L)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eProduct Details:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFeatures\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduced mass equals increased acceleration\u003c\/li\u003e\n\u003cli\u003eA lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag\u003c\/li\u003e\n\u003cli\u003eIncreased supercharger efficiency due to less parasitic drag on the crank\u003c\/li\u003e\n\u003cli\u003eImproved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel\u003c\/li\u003e\n\u003cli\u003eCM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels\u003c\/li\u003e\n\u003cli\u003eCM uses High Carbon steel for the friction surface\u003c\/li\u003e\n\u003cli\u003eCM uses an OEM steel ring gear secured by bolts\u003c\/li\u003e\n\u003cli\u003eCM offers a limited lifetime warranty\u003c\/li\u003e\n\u003cli\u003eCM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2\u003c\/li\u003e\n\u003cli\u003eWeight: 13lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003eAbout Clutch Masters\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 1.4;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/CM.jpg?v=1472158582\" alt=\"\" width=\"235\" height=\"83\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003eHigh Technology Makes the Difference\u003c\/div\u003e\n\u003cp\u003eHistorically, high performance clutches have been a compromise. While improving holding or clamping pressure, manufacturers nearly always increase pedal pressure to an uncomfortable point, especially for stop-and-go traffic.\u003c\/p\u003e\n\u003cp\u003eBesides drivability concerns, additional pedal pressure can adversely affect stock clutch linkage and cause premature thrust bearing wear, leading to missed shifts, damaged clutch components, and even engine destruction.\u003c\/p\u003e\n\u003cp\u003eToday, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technique, Clutch Masters has increased clamping power, often without changing pedal pressure.\u003c\/p\u003e\n\u003cp\u003eExcessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.\u003c\/p\u003e\n\u003cp\u003eA clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.\u003c\/p\u003e\n\u003cdiv\u003eClamping Force vs. Pedal Pressure\u003c\/div\u003e\n\u003cp\u003eDesigning heavy duty and high performance clutches with a very high clamp load and incredible coefficient of friction is a fairly simple engineering task. To do so without increasing pedal pressure has not been so easy. Even the education process of changing opinions that an increase in pedal pressure must accompany a high performance clutch with increased clamping force has been difficult.\u003c\/p\u003e\n\u003cp\u003eClutch Masters, a premier manufacturer of fine quality clutches since 1976, has taken this experience and a clean sheet of paper to re-engineer their line of performance clutches to address these problems. The proof of this success is now available from Clutch Masters as a complete line of clutch systems for high performance street and racing use. It is the first major breakthrough in performance clutches in over four decades.\u003c\/p\u003e\n\u003cp\u003eFollowing are ways of increasing clamp load. The methods vary in sophistication and effectiveness:\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHeat Treating\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe diaphragm, or spring, is heat treated to increase spring tension for 10-40% more clamping force. This typically makes the diaphragm more brittle and more subject to premature failure. Many high performance clutch manufacturers use this procedure. Clutch Masters has perfected a more precise method of heat-treating its diaphragms to maintain consistent clamping force without compromising structural integrity.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDouble Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe double diaphragm is a method of increasing clamping force by stacking two diaphragms on top of each other. This will typically achieve the desired clamping force but will also increase the pedal pressure to a very high rate. For FX 500 and Multiple Disc set-ups, Clutch Masters uses two separate heat treating processes - one for each diaphragm - to ensure perfect compatibility between the two diaphragms. Additionally, there is a special friction-reducing material between the diaphragms to provide optimum clamping force while maintaining an ultra smooth operation.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThicker Diaphragm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA thicker (than stock) diaphragm allows extra clamping force but is considered to be an on or off style clutch. Smooth engagement is severely compromised with the thick diaphragm due to the reduced elasticity of the thicker material. Clutch Masters does not use this technique.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eHi-Leverage\u003csup\u003etm\u003c\/sup\u003e Pressure Plate\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy re-engineering the pressure plate leverage ring (moving it closer to the pivot point), Clutch Masters solves the clamping vs. pedal pressure problem in a unique way. By moving the pressure ring, Clutch Masters Hi-Leverage\u003csup\u003etm \u003c\/sup\u003ePressure Plates take mechanical advantage of the leverage principle. By moving the leverage ring closer to the pivot point, the pressure applied to the plate is increased significantly without unnecessarily increasing pedal pressure, as is typically the case in other clutches. This Hi-Leverage\u003csup\u003etm\u003c\/sup\u003efeature is unique to the high-performance clutch industry.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e***By combining these various methods of increasing clamping pressure with their re-engineered discs, Clutch Masters has developed a unique way of substantially increasing clutch performance without any of the negative side affects usually found in the typical high performance clutch.****\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Difference:\u003c\/p\u003e\n\u003cp\u003eClutch Masters clutches are true High Performance Clutch Systems and are technologically superior to anything currently on the market.\u003c\/p\u003e\n\u003cp\u003eTo develop a clutch with all the desired performance characteristics for intended applications is the challenge of a high performance clutch company. The Clutch Masters clutch system is unique in the industry. We use Hi-Leverage\u003csup\u003etm\u003c\/sup\u003e technology (refer to the Pressure Plate section) in our pressure plates, which significantly increases clamping force with no unnecessary increase in pedal pressure. Discs are designed either with reduced Marcel or a solid hub design to take advantage of our Hi-Leverage\u003csup\u003etm\u003c\/sup\u003epressure plate. The combination of these cutting edge technologies creates the finest clutch system on the market.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Clutch Masters, with over 35 years in the industry, has researched hundreds of friction materials and uses only the best materials available for each intended application. By combining the optimum clamping force with the finest friction materials - each with their own unique coefficient of friction - Clutch Masters has developed a line of clutches that provide ultimate performance in virtually any severe environment.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eSpecific Purposes\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAll Clutch Masters clutches are specifically designed for varying stages of high performance and\/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling conditions of competition, Clutch Masters offers complete clutch systems.\u003c\/div\u003e\n\u003cp\u003eWhen the Class 30 Grey Iron material of a typical pressure plate is not suitable, Clutch Masters uses doubly strong Ductile Iron, which is the case with most CM clutches.\u003c\/p\u003e\n\u003cp\u003eThe friction material found on all OE discs and many high performance discs is simply riveted to the disc center section. Under severe use and\/or high RPM applications, the disc material can fragment and break apart, becoming dislodged from the disc center section. Once this occurs, the clutch has failed completely and is rendered inoperable. Clutch Masters has solved this common problem on their street and street\/strip discs by bonding a special steel backing plate (see disc technology and figure X) to the friction material. This unique feature provides significantly increased heat dissipation properties - heat is the #1 enemy of the clutch - and very high structural integrity to keep the disc intact under severe applications.\u003c\/p\u003e\n\u003cp\u003eRacing Only discs use solid center sections to give all the reliability and performance they need on the track. Warning: These solid hub discs are not meant for street applications as they transfer very high shock loads to the transmission, causing premature transmission failure, and will chatter upon starting from a stop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Weakest Link\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIn the battle of Man vs. Machine, whenever possible, engineers build into any given mechanical system a point of failure, or weak point, which is designed to wear or fail, therefore preventing damaging major components or even catastrophic failure of the entire system.\u003c\/div\u003e\n\u003cp\u003eIn the battle of Engine vs. Transmission, the clutch is designed to be that weak link. It is ultimately less expensive to replace a clutch than an engine or transmission. The challenge in building a high performance clutch is to build the unit for different intended heavy duty or severe applications which will hold the power; not break the transmission or internal engine components and retain an overall smooth operation of the entire system (whenever possible). This is the balancing act that Clutch Masters has perfected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"3.6L Carrera","offer_id":39581443817556,"sku":"clmFW-101-AL","price":995.0,"currency_code":"USD","in_stock":true},{"title":"3.8L Carrera S","offer_id":39581443850324,"sku":"clmFW-038-AL","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/fw-101-al.jpg?v=1607440351"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/collections\/92.png?v=1583856750","url":"https:\/\/flat6motorsports.com\/collections\/clutchmasters\/model_987-2-cayman-s+model_997-2-carrera-s.oembed","provider":"Flat 6 Motorsports - Porsche Aftermarket Specialists ","version":"1.0","type":"link"}