{"title":"Elephant Racing","description":"","products":[{"product_id":"elephant-racing-quickchange-camber-plates-996-997-987-981","title":"Elephant Racing QuickChange Camber Plates (997)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005 - 2012 Porsche 911 (Select trim)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEase Of Adjustment\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing's QuickChange™ Camber plates for the front of 986 and 987 cars offer true ease of adjustment. The \"slider\" design allows a full range of adjustment without the need for removing and rotating the plate.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore Camber\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eRange of adjustment is extreme, with 19mm of added travel. This delivers nearly 2 degrees of added camber, allowing even DOT-R tires and slicks to produce maximum grip.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFully Weather Sealed\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe included spherical bearings are oversized, maintenance-free, and PTFE lined - they never need lubrication.\u003c\/p\u003e\n\u003cp\u003eIntegrated weather seals on both bottom and top of the spherical bearing extend bearing life. Dirt and water enter competing non-sealed products to accelerate bearing wear. Worse yet are bottom-only seals that can actually trap water that enters the open bearing top!\u003c\/p\u003e\n\u003cp\u003eOur weather seals are fully compatible with coilovers and stock type springs.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUse Stock Springs Or Coilovers\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHigher Performance\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eSpherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons;\u003c\/p\u003e\n\u003cp\u003eThe factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.\u003c\/p\u003e\n\u003cp\u003eThe factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.elephantracing.com\/documents\/2152205%20996%20Camber%20Plate%20Installation.pdf\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Carrera\/ Carrera S (2WD)","offer_id":49962677764398,"sku":"2152205","price":590.0,"currency_code":"USD","in_stock":true},{"title":"Carrera 4\/ Carrera 4S\/ Turbo (4WD)","offer_id":49962677797166,"sku":"2152210","price":590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-camber-plates-v3.jpg?v=1527265683"},{"product_id":"elephant-racing-eccentric-monoball-bearing-996-997-991-987-981","title":"Elephant Racing Eccentric Monoball Bearing (991)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2013 - 2019 Porsche 911 Carrera \/ Carrera S \/ Carrera GTS (991)\u003c\/li\u003e\n\u003cli\u003e2013 - 2019 Porsche 911 Turbo \/ Turbo S (991)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003cbr\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003eThese Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, provide low friction and precisely hold camber settings. The eccentric design allows increasing or decreasing camber, as needed.\u003c\/div\u003e\n\u003cdiv\u003e  \u003c\/div\u003e\n\u003cdiv\u003eMade from hardened steel, plated and weather sealed, these bearings are made to last. Fits easily into the front and rear stock and GT3 type control arms of 1997- on to 991 cars.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cem\u003eIncreasing camber\u003c\/em\u003e:\u003c\/span\u003e Position the eccentric to Maximize Lower Wishbone length, adding about .36 degree of negative camber on the rear suspension, .39 degrees on the front suspension cost effective for cars that just want extra camber. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cem\u003eDecreasing camber\u003c\/em\u003e:\u003c\/span\u003e  Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .36 degrees more positive, front camber about .39 degrees more positive.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":33288109005,"sku":"2260006","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-lower-wishbone-monoball-large.jpg?v=1525407638"},{"product_id":"other-elephant-racing-products","title":"Other Elephant Racing Products","description":"We carry the complete line of Elephant Racing products. Please\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"#zbwid-9aa46557\"\u003econtact us\u003c\/a\u003e\u003cspan\u003e for a custom quote on any part you do not see listed. \u003c\/span\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":33549667213,"sku":"","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/logo_061813.png?v=1525407289"},{"product_id":"elephant-racing-eccentric-monoball-bearing-cayman-boxster-987","title":"Elephant Racing Eccentric Monoball Bearing (Cayman \/ Boxster 987)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005 - 2012 Porsche Boxster \/ Cayman\u003c\/li\u003e\n\u003cli\u003e2013 - 2016 Porsche Boxster \/ Cayman\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003eThese Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, provide low friction and precisely hold camber settings. The eccentric design allows increasing or decreasing camber, as needed.\u003c\/div\u003e\n\u003cdiv\u003e  \u003c\/div\u003e\n\u003cdiv\u003eMade from hardened steel, plated and weather sealed, these bearings are made to last. Fits easily into the front and rear stock and GT3 type control arms of 1997- on to 991 cars.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cem\u003eIncreasing camber\u003c\/em\u003e:\u003c\/span\u003e Position the eccentric to Maximize Lower Wishbone length, adding about .36 degree of negative camber on the rear suspension, .39 degrees on the front suspension cost effective for cars that just want extra camber. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cem\u003eDecreasing camber\u003c\/em\u003e:\u003c\/span\u003e  Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .36 degrees more positive, front camber about .39 degrees more positive.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":7873002668087,"sku":"2260006","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-lower-wishbone-monoball-large_f143ec1d-1ea4-4274-b80e-aa1857666d26.jpg?v=1525572866"},{"product_id":"elephant-racing-quickchange-camber-plates-cayman-boxster-987","title":"Elephant Racing QuickChange Camber Plates (Cayman \/ Boxster 987)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1999 - 2012 Porsche 911 (RWD-only)\u003c\/li\u003e\n\u003cli\u003e2005 - 2016 Porsche Boxster \/ Boxster S\u003c\/li\u003e\n\u003cli\u003e2006 - 2016 Porsche Cayman \/ Cayman S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEase Of Adjustment\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing's QuickChange™ Camber plates for the front of 986 and 987 cars offer true ease of adjustment. The \"slider\" design allows a full range of adjustment without the need for removing and rotating the plate.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore Camber\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eRange of adjustment is extreme, with 19mm of added travel. This delivers nearly 2 degrees of added camber, allowing even DOT-R tires and slicks to produce maximum grip.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFully Weather Sealed\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe included spherical bearings are oversized, maintenance-free, and PTFE lined - they never need lubrication.\u003c\/p\u003e\n\u003cp\u003eIntegrated weather seals on both bottom and top of the spherical bearing extend bearing life. Dirt and water enter competing non-sealed products to accelerate bearing wear. Worse yet are bottom-only seals that can actually trap water that enters the open bearing top!\u003c\/p\u003e\n\u003cp\u003eOur weather seals are fully compatible with coilovers and stock type springs.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUse Stock Springs Or Coilovers\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHigher Performance\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eSpherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons;\u003c\/p\u003e\n\u003cp\u003eThe factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.\u003c\/p\u003e\n\u003cp\u003eThe factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.elephantracing.com\/documents\/2152205%20996%20Camber%20Plate%20Installation.pdf\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":7983874277431,"sku":"2152205","price":590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-camber-plates-v3_8c5201e2-a087-4b3d-92c3-9e07f7bf6b84.jpg?v=1527265684"},{"product_id":"elephant-racing-quickchange-camber-plates-cayman-boxster-981","title":"Elephant Racing Offset Front Camber Plates (Cayman \/ Boxster 981)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2012+ Porsche 911 (991 Models)\u003c\/li\u003e\n\u003cli\u003e2012+ Porsche Boxster \/ Boxster S (981)\u003c\/li\u003e\n\u003cli\u003e2012+ Porsche Cayman \/ Cayman S (981)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur offset front camber plates allow for additional camber and castor over the factory range of adjustment, similar to the GT3 geometry. These camber plates fit original factory type struts, including those equipped with PASM.\u003c\/p\u003e\n\u003cp\u003eThese offset plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates which use compliant rubber bushings. The teflon lined spherical bearings used in our kit are entirely maintenance free and require no supplemental lubrication. These plates are sealed to prevent contamination from water or grime, thus extending bearing life. This makes the Elephant Racing camber plate kit perfect for regular street use, as well as extended abuse on the race track.\u003c\/p\u003e\n\u003cp\u003eSpherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.\u003c\/li\u003e\n\u003cli\u003eThe factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"with Stock-type Springs","offer_id":28530134220884,"sku":"2152211","price":750.0,"currency_code":"USD","in_stock":true},{"title":"with Coilovers","offer_id":7983894265911,"sku":"2152207","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/991-offset-camber-plate-top-detail.jpg?v=1561472070"},{"product_id":"elephant-racing-eccentric-monoball-bearing-cayman-boxster-981","title":"Elephant Racing Eccentric Monoball Bearing (Cayman \/ Boxster 981)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005 - 2012 Porsche Boxster \/ Cayman\u003c\/li\u003e\n\u003cli\u003e2013 - 2016 Porsche Boxster \/ Cayman\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003eThese Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, provide low friction and precisely hold camber settings. The eccentric design allows increasing or decreasing camber, as needed.\u003c\/div\u003e\n\u003cdiv\u003e  \u003c\/div\u003e\n\u003cdiv\u003eMade from hardened steel, plated and weather sealed, these bearings are made to last. Fits easily into the front and rear stock and GT3 type control arms of 1997- on to 991 cars.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cem\u003eIncreasing camber\u003c\/em\u003e:\u003c\/span\u003e Position the eccentric to Maximize Lower Wishbone length, adding about .36 degree of negative camber on the rear suspension, .39 degrees on the front suspension cost effective for cars that just want extra camber. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cem\u003eDecreasing camber\u003c\/em\u003e:\u003c\/span\u003e  Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .36 degrees more positive, front camber about .39 degrees more positive.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":7984251240503,"sku":"2260006","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-lower-wishbone-monoball-large_89c7c5c7-896b-47d7-8ecd-5fd4d5586951.jpg?v=1526085891"},{"product_id":"elephant-racing-quickchange-camber-plates-996","title":"Elephant Racing QuickChange Camber Plates (996)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1999 - 2005 Porsche 911 (RWD-only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEase Of Adjustment\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing's QuickChange™ Camber plates for the front of 986 and 987 cars offer true ease of adjustment. The \"slider\" design allows a full range of adjustment without the need for removing and rotating the plate.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore Camber\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eRange of adjustment is extreme, with 19mm of added travel. This delivers nearly 2 degrees of added camber, allowing even DOT-R tires and slicks to produce maximum grip.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFully Weather Sealed\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe included spherical bearings are oversized, maintenance-free, and PTFE lined - they never need lubrication.\u003c\/p\u003e\n\u003cp\u003eIntegrated weather seals on both bottom and top of the spherical bearing extend bearing life. Dirt and water enter competing non-sealed products to accelerate bearing wear. Worse yet are bottom-only seals that can actually trap water that enters the open bearing top!\u003c\/p\u003e\n\u003cp\u003eOur weather seals are fully compatible with coilovers and stock type springs.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUse Stock Springs Or Coilovers\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHigher Performance\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eSpherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons;\u003c\/p\u003e\n\u003cp\u003eThe factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.\u003c\/p\u003e\n\u003cp\u003eThe factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.elephantracing.com\/documents\/2152205%20996%20Camber%20Plate%20Installation.pdf\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":7994811711543,"sku":"2152205","price":590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-camber-plates-v3_ed1bd169-283f-4a09-8ce0-ef218e79d49f.jpg?v=1527265682"},{"product_id":"elephant-racing-eccentric-monoball-bearing-996","title":"Elephant Racing Eccentric Monoball Bearing (996)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1999 - 2005 Porsche 911\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003eThese Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, provide low friction and precisely hold camber settings. The eccentric design allows increasing or decreasing camber, as needed.\u003c\/div\u003e\n\u003cdiv\u003e  \u003c\/div\u003e\n\u003cdiv\u003eMade from hardened steel, plated and weather sealed, these bearings are made to last. Fits easily into the front and rear stock and GT3 type control arms of 1997- on to 991 cars.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cem\u003eIncreasing camber\u003c\/em\u003e:\u003c\/span\u003e Position the eccentric to Maximize Lower Wishbone length, adding about .36 degree of negative camber on the rear suspension, .39 degrees on the front suspension cost effective for cars that just want extra camber. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cem\u003eDecreasing camber\u003c\/em\u003e:\u003c\/span\u003e  Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .36 degrees more positive, front camber about .39 degrees more positive.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":7995337474103,"sku":"2260006","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-lower-wishbone-monoball-large_21645d77-8aa4-4a8b-9384-fd2f2817edb6.jpg?v=1526141573"},{"product_id":"elephant-racing-eccentric-monoball-bearing-997","title":"Elephant Racing Eccentric Monoball Bearing (997)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005 - 2016 Porsche 911\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003eThese Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, provide low friction and precisely hold camber settings. The eccentric design allows increasing or decreasing camber, as needed.\u003c\/div\u003e\n\u003cdiv\u003e  \u003c\/div\u003e\n\u003cdiv\u003eMade from hardened steel, plated and weather sealed, these bearings are made to last. Fits easily into the front and rear stock and GT3 type control arms of 1997- on to 991 cars.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cem\u003eIncreasing camber\u003c\/em\u003e:\u003c\/span\u003e Position the eccentric to Maximize Lower Wishbone length, adding about .36 degree of negative camber on the rear suspension, .39 degrees on the front suspension cost effective for cars that just want extra camber. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cem\u003eDecreasing camber\u003c\/em\u003e:\u003c\/span\u003e  Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .36 degrees more positive, front camber about .39 degrees more positive.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv align=\"left\"\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":8105404465207,"sku":"2260006","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-lower-wishbone-monoball-large_848d0a5b-4bad-4f29-8dbf-0c2ed440666e.jpg?v=1526785958"},{"product_id":"elephant-racing-quickchange-camber-plates-991","title":"Elephant Racing Front QuickChange Camber Plates (991)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2013 - 2019 Porsche 911 Carrera \/ Carrera S \/ Carrera GTS (991)\u003c\/li\u003e\n\u003cli\u003e2013 - 2019 Porsche 911 Turbo \/ Turbo S (991)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore Camber and Caster\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eOur offset front camber plates allow for additional camber and castor over the factory range of adjustment, similar to the GT3 geometry. These camber plates fit original factory type struts, including those equipped with PASM.\u003c\/p\u003e\n\u003cp\u003eThese plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates which use compliant rubber bushings. The teflon lined spherical bearings used in our kit are entirely maintenance free and require no supplemental lubrication. These plates are sealed to prevent contamination from water or grime, thus extending bearing life. This makes the Elephant Racing camber plate kit perfect for regular street use, as well as extended abuse on the race track.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUse Stock Springs Or Coilovers\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHigher Performance\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eSpherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons;\u003c\/p\u003e\n\u003cp\u003eThe factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.\u003c\/p\u003e\n\u003cp\u003eThe factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.elephantracing.com\/suspension\/instructions\/2152207_Front-Camber-Plate-Instructions.pdf?iframe=true\u0026amp;width=80%\u0026amp;height=95%\" title=\"991 Install Guide - Elephant Racing Camber Plates\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Stock Style Struts (Bilstein\/KW\/ Ohlins)","offer_id":12528876355639,"sku":"2152211","price":770.0,"currency_code":"USD","in_stock":true},{"title":"Race Style Struts (JRZ\/Moton\/MCS\/AST\/GT3)","offer_id":12528846209079,"sku":"2152207","price":770.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/991-offset-camber-plates.jpg?v=1535048967"},{"product_id":"elephant-racing-adjustable-rear-lower-control-arms-991","title":"Elephant Racing Adjustable Rear Lower Control Arms (991)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2012 - 2019 Porsche 911 (all 991)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eThe kit includes both rear lower wishbones. Order one kit per car.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing developed the 991 Rear Adjustable Wishbone to provide the camber and precision you need. Machined from billet aluminum, hard anodized and fully weather sealed, these adjustable rear control arms are strong enough for the track, and durable for extended street use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Camber Adjustment\u003c\/strong\u003e\u003cspan\u003e – The double adjuster makes fast and precise camber changes in minutes. Dialing in your race car, or adding camber for the occasional track day is now a simple operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCamber Range\u003c\/strong\u003e – Extended range of adjustment lets you get aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Eliminate suspension deflection associated with rubber compression. For superior driving precision, spherical bearing type heim joints are used instead of the rubber bushings that are found in OEM control arms. The arms are fully rebuildable with replaceable heim joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Weather Sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Rubber boot protects the heim joint to keep water and contaminant out for extended life.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":28116181352532,"sku":"2180012","price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/991-adjustable-rear-lower-wishbone.jpg?v=1557262774"},{"product_id":"elephant-racing-bump-steer-kit-987-981-cayman-boxster","title":"Elephant Racing Bump Steer Kit - 981 Cayman \/ Boxster","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2013 - 2016 Porsche Cayman \/ Boxster (All 981 variants)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrect the geometry for lowered cars with bump steer adjustment and an angled head on this machined aluminum outer tie-rod.\u003c\/p\u003e\n\u003cp\u003eElephant Racing solves this problem by angling the head to move the stud back towards the center of its range of articulation at static ride height.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBump steer adjustable\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– The built in bump steer adjustment lets you dial in a minimal bump steer curve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled head\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Lower the car and the tie rods angle down. This shifts the ball stud from its center and limits the available range of articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully weather sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proper boot at the ball stud to keep water and contaminant out for extended life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":28406511665236,"sku":"2180008","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-adjustable-tie-rod-ends-large.jpg?v=1560205467"},{"product_id":"elephant-racing-bump-steer-kit-996-997-all-variants","title":"Elephant Racing Bump Steer Kit - 996 911","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1999 - 2004 Porsche Carrera (All 996 variants)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrect the geometry for lowered cars with bump steer adjustment and an angled head on this machined aluminum outer tie-rod.\u003c\/p\u003e\n\u003cp\u003eElephant Racing solves this problem by angling the head to move the stud back towards the center of its range of articulation at static ride height.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBump steer adjustable\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– The built in bump steer adjustment lets you dial in a minimal bump steer curve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled head\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Lower the car and the tie rods angle down. This shifts the ball stud from its center and limits the available range of articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully weather sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proper boot at the ball stud to keep water and contaminant out for extended life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":28406535290964,"sku":"2180008","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-adjustable-tie-rod-ends-large_e7706ad1-7b46-4dff-91b8-54091ef64989.jpg?v=1560205903"},{"product_id":"elephant-racing-bump-steer-kit-991-911-all-variants","title":"Elephant Racing Bump Steer Kit (991)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2012 - 2019 Porsche 911 (all 991)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrect the geometry for lowered cars with bump steer adjustment and an angled head on this machined aluminum outer tie-rod.\u003c\/p\u003e\n\u003cp\u003eElephant Racing solves this problem by angling the head to move the stud back towards the center of its range of articulation at static ride height.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBump steer adjustable\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– The built in bump steer adjustment lets you dial in a minimal bump steer curve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled head\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Lower the car and the tie rods angle down. This shifts the ball stud from its center and limits the available range of articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully weather sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proper boot at the ball stud to keep water and contaminant out for extended life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":28406661185620,"sku":"2180008","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-adjustable-tie-rod-ends-large_aa2376c1-ff4e-40f5-a691-5f64e244d067.jpg?v=1560208610"},{"product_id":"elephant-racing-adjustable-front-lower-control-arms-991-997-996-all-variants","title":"Elephant Racing Adjustable Front Lower Control Arms - 996 911 (All Variants)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1999 - 2004 Porsche 911 (Including all 996 variants)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing adjustable lower control arms provide the camber, caster and precision you need. Length adjustable similar to the factory GT3 control arms, but without the need for shims.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick and Easy Adjustments\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-2511 size-full\" src=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-control-arm-adjustment-illustration.gif\" alt=\"How to adjust lower control arms for Porsche 996, 997, Boxster, Cayman\" width=\"390\" height=\"260\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiden Track\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Use in combination with our camberplates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Weather Sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use..\u003c\/p\u003e\n\u003cp\u003eThe arms are fully rebuildable with replaceable heim and ball joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCamber Adjustment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaster Adjustment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.\u003c\/p\u003e\n\u003cul class=\"note\"\u003e\n\u003cli\u003e\u003cstrong\u003eOn 996, 997, \u0026amp; 991 Cars:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCenter puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca class=\"zoom\" href=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large.jpg\" rel=\"tc-fancybox-group2508\" data-rel=\"prettyPhoto-gallery-kM92TqVA\" data-rl_title=\"\" data-rl_caption=\"\" title=\"\"\u003e\u003cimg class=\"alignleft wp-image-2512\" src=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-150x122.jpg\" alt=\"\" width=\"100\" height=\"81\" srcset=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-150x122.jpg 150w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-300x244.jpg 300w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-768x624.jpg 768w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-110x89.jpg 110w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-400x325.jpg 400w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large.jpg 800w\" sizes=\"(max-width: 100px) 100vw, 100px\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eLitronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Yes include Liftronic Headlight Bracket","offer_id":48591354364206,"sku":"2180001","price":1340.0,"currency_code":"USD","in_stock":true},{"title":"No Bracket","offer_id":48591354396974,"sku":"2180002","price":1290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-adjustable-control-arm-with-caster-puck-large.jpg?v=1560211215"},{"product_id":"elephant-racing-adjustable-front-lower-control-arms-981-987-all-variants","title":"Elephant Racing Adjustable Front \u0026 Rear Lower Control Arms - 987 Cayman \/ Boxster","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005 - 2012 Porsche Cayman and Boxster (Including all 987 variants)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eElephant Racing \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eadjustable front lower control arm\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003es provide the camber, caster and precision you need.\u003c\/span\u003e Length adjustable similar to the factory GT3 control arms, but without the need for shims.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick and Easy Adjustments\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-2511 size-full\" src=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-control-arm-adjustment-illustration.gif\" alt=\"How to adjust lower control arms for Porsche 996, 997, Boxster, Cayman\" width=\"390\" height=\"260\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiden Track\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Use in combination with our camberplates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Weather Sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use..\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003ePorsche control arms\u003c\/span\u003e\u003cspan\u003e are fully rebuildable with replaceable heim and ball joints.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCamber Adjustment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaster Adjustment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.\u003c\/p\u003e\n\u003cul class=\"note\"\u003e\n\u003cli\u003e\u003cstrong\u003eOn 996, 997, \u0026amp; 991 Cars:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCenter puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca class=\"zoom\" href=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large.jpg\" rel=\"tc-fancybox-group2508\" data-rel=\"prettyPhoto-gallery-kM92TqVA\" data-rl_title=\"\" data-rl_caption=\"\" title=\"\"\u003e\u003cimg class=\"alignleft wp-image-2512\" src=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-150x122.jpg\" alt=\"\" width=\"100\" height=\"81\" srcset=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-150x122.jpg 150w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-300x244.jpg 300w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-768x624.jpg 768w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-110x89.jpg 110w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-400x325.jpg 400w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large.jpg 800w\" sizes=\"(max-width: 100px) 100vw, 100px\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eLitronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Yes include Liftronic Headlight Bracket","offer_id":45196979863854,"sku":"2180001 + 1 Liftronic Bracket","price":1340.0,"currency_code":"USD","in_stock":true},{"title":"No Bracket","offer_id":45196979896622,"sku":"2180001","price":1290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-adjustable-control-arm-with-caster-puck-large_7b4d69f0-e9e2-4495-9f81-70cdfd3c705f.jpg?v=1560211555"},{"product_id":"elephant-racing-adjustable-front-lower-control-arms-981-cayman-boxster","title":"Elephant Racing Adjustable Front Lower Control Arms - 981 Cayman \/ Boxster","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2013 - 2016 Porsche Cayman and Boxster (Including all 981 variants)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing adjustable lower control arms provide the camber, caster and precision you need. Length adjustable similar to the factory GT3 control arms, but without the need for shims.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick and Easy Adjustments\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-2511 size-full\" src=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-control-arm-adjustment-illustration.gif\" alt=\"How to adjust lower control arms for Porsche 996, 997, Boxster, Cayman\" width=\"390\" height=\"260\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiden Track\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Use in combination with our camberplates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Weather Sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use..\u003c\/p\u003e\n\u003cp\u003eThe arms are fully rebuildable with replaceable heim and ball joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCamber Adjustment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaster Adjustment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.\u003c\/p\u003e\n\u003cul class=\"note\"\u003e\n\u003cli\u003e\u003cstrong\u003eOn 996, 997, \u0026amp; 991 Cars:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCenter puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca class=\"zoom\" href=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large.jpg\" rel=\"tc-fancybox-group2508\" data-rel=\"prettyPhoto-gallery-kM92TqVA\" data-rl_title=\"\" data-rl_caption=\"\" title=\"\"\u003e\u003cimg class=\"alignleft wp-image-2512\" src=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-150x122.jpg\" alt=\"\" width=\"100\" height=\"81\" srcset=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-150x122.jpg 150w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-300x244.jpg 300w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-768x624.jpg 768w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-110x89.jpg 110w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-400x325.jpg 400w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large.jpg 800w\" sizes=\"(max-width: 100px) 100vw, 100px\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eLitronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"PAMS","offer_id":45197051822382,"sku":"2180001 + QTY 2 Brackets","price":1390.0,"currency_code":"USD","in_stock":true},{"title":"Non PASM","offer_id":45197051855150,"sku":"2180001 + 1 Bracket","price":1340.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-adjustable-control-arm-with-caster-puck-large_bc0ffa50-c93b-440a-9be7-94a2679a8178.jpg?v=1562769401"},{"product_id":"elephant-racing-bump-steer-kit-987-cayman-boxster","title":"Elephant Racing Bump Steer Kit - 987 Cayman \/ Boxster","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005 - 2012 Porsche Cayman \/ Boxster (All 987 variants)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrect the geometry for lowered cars with bump steer adjustment and an angled head \u003cspan\u003eon this machined aluminum outer tie-rod.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing solves this problem by angling the head to move the stud back towards the center of its range of articulation at static ride height.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBump steer adjustable\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– The built in bump steer adjustment lets you dial in a minimal bump steer curve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled head\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Lower the car and the tie rods angle down. This shifts the ball stud from its center and limits the available range of articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully weather sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proper boot at the ball stud to keep water and contaminant out for extended life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":28678889242708,"sku":"2180008","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-adjustable-tie-rod-ends-large_b0e9de0c-40dc-47f5-ae03-e34e870d5c08.jpg?v=1562769999"},{"product_id":"elephant-racing-bump-steer-kit-997-911","title":"Elephant Racing Bump Steer Kit - 997 911","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005 - 2012 Porsche Carrera (All 997 variants)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrect the geometry for lowered cars with bump steer adjustment and an angled head on this machined aluminum outer Porsche tie-rod ends.\u003c\/p\u003e\n\u003cp\u003eElephant Racing solves this problem by angling the head of the bump steer tie-rod ends to move the stud back towards the center of its range of articulation at static ride height.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBump steer adjustable\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– The built in bump steer adjustment lets you dial in a minimal bump steer curve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled head\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Lower the car and the tie rods angle down. This shifts the ball stud from its center and limits the available range of articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully weather sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proper boot at the ball stud to keep water and contaminant out for extended life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":28678994952276,"sku":"2180008","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-adjustable-tie-rod-ends-large_8b4c9b35-34e7-4dde-8713-e14af5a538ce.jpg?v=1562771240"},{"product_id":"elephant-racing-adjustable-front-lower-control-arms-991-911-all-variants","title":"Elephant Racing Adjustable Front Lower Control Arms (991)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2013 - 2019 Porsche 911 (Including all 991 variants)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing adjustable lower control arms provide the camber, caster and precision you need. Length adjustable similar to the factory GT3 control arms, but without the need for shims.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick and Easy Adjustments\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-2511 size-full\" src=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-control-arm-adjustment-illustration.gif\" alt=\"How to adjust lower control arms for Porsche 996, 997, Boxster, Cayman\" width=\"390\" height=\"260\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiden Track\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Use in combination with our camberplates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Weather Sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use..\u003c\/p\u003e\n\u003cp\u003eThe arms are fully rebuildable with replaceable heim and ball joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCamber Adjustment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaster Adjustment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.\u003c\/p\u003e\n\u003cul class=\"note\"\u003e\n\u003cli\u003e\u003cstrong\u003eOn 996, 997, \u0026amp; 991 Cars:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCenter puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca class=\"zoom\" href=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large.jpg\" rel=\"tc-fancybox-group2508\" data-rel=\"prettyPhoto-gallery-kM92TqVA\" data-rl_title=\"\" data-rl_caption=\"\" title=\"\"\u003e\u003cimg class=\"alignleft wp-image-2512\" src=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-150x122.jpg\" alt=\"\" width=\"100\" height=\"81\" srcset=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-150x122.jpg 150w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-300x244.jpg 300w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-768x624.jpg 768w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-110x89.jpg 110w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-400x325.jpg 400w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large.jpg 800w\" sizes=\"(max-width: 100px) 100vw, 100px\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eLitronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"PASM","offer_id":45145199477038,"sku":"2180001 + QTY 2 Liftonric Bracket","price":1390.0,"currency_code":"USD","in_stock":true},{"title":"Non PASM","offer_id":45145199509806,"sku":"2180001 + QTY 1 Liftronic Bracket","price":1340.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-adjustable-control-arm-with-caster-puck-large_073b343c-ffe1-49d5-ad5b-d6ade4779a82.jpg?v=1562771536"},{"product_id":"elephant-racing-adjustable-front-lower-control-arms-997-911-all-variants","title":"Elephant Racing Adjustable Front\/ Rear Lower Control Arms - 997 911 (All Variants)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005 - 2012 Porsche 911 (Including all 997 variants)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing adjustable lower control arms provide the camber, caster and precision you need. Length adjustable similar to the factory GT3 control arms, but without the need for shims.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick and Easy Adjustments\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-2511 size-full\" src=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-control-arm-adjustment-illustration.gif\" alt=\"How to adjust lower control arms for Porsche 996, 997, Boxster, Cayman\" width=\"390\" height=\"260\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiden Track\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Use in combination with our camberplates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Weather Sealed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use..\u003c\/p\u003e\n\u003cp\u003eThe arms are fully rebuildable with replaceable heim and ball joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCamber Adjustment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaster Adjustment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.\u003c\/p\u003e\n\u003cul class=\"note\"\u003e\n\u003cli\u003e\u003cstrong\u003eOn 996, 997, \u0026amp; 991 Cars:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCenter puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca class=\"zoom\" href=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large.jpg\" rel=\"tc-fancybox-group2508\" data-rel=\"prettyPhoto-gallery-kM92TqVA\" data-rl_title=\"\" data-rl_caption=\"\" title=\"\"\u003e\u003cimg class=\"alignleft wp-image-2512\" src=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-150x122.jpg\" alt=\"\" width=\"100\" height=\"81\" srcset=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-150x122.jpg 150w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-300x244.jpg 300w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-768x624.jpg 768w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-110x89.jpg 110w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large-400x325.jpg 400w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/litronic-ubracket-kit-large.jpg 800w\" sizes=\"(max-width: 100px) 100vw, 100px\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eLitronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Yes include Liftronic Headlight Bracket","offer_id":48591357215022,"sku":"2180001","price":1340.0,"currency_code":"USD","in_stock":true},{"title":"No Bracket","offer_id":48591357247790,"sku":"2180001","price":1290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-adjustable-control-arm-with-caster-puck-large_92d2c079-fc8c-4920-b339-241c2aeaacc1.jpg?v=1562772652"},{"product_id":"elephant-racing-front-quick-change-strut-brace-996","title":"Elephant Racing Front Quick Change Strut Brace (996)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1999 - 2004 Porsche 911 (all 996 variants, except GT3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique QuickChange™ brace. Inspired by the chassis braces used on 935 race cars, the X style brace increases chassis torsional rigidity. It attaches to, and triangulates, the four corners of the trunk area to increase structural rigidity and improve handling while being easy to remove when necessary\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eQuick Release\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe tubes are secured with a quick release pin in each corner. Each pin is held in place by a detent ball to lock it in place. Quick Release pins allow fast, tool-less removal for service access or expanded stowage capacity.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBuild Quality\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTruly awesome appearance matches the functionality. Oversized aluminum tubing has a beefy, stout appearance yet remains lightweight and has a purposeful frosted anodize finish. CNC machined billet aluminum clevis ends are anodized charcoal gray to match any car.\u003c\/p\u003e\n\u003cp\u003e*Drilling is required along with minimal trimming of the carpet and trim. Order one unit per car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.elephantracing.com\/suspension\/instructions\/2162212_Front-X-Brace-Instructions.pdf?iframe=true\u0026amp;width=80%\u0026amp;height=95%\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":28951421845588,"sku":"2162215","price":590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-997-quickchange-strut-brace-short.png?v=1565113731"},{"product_id":"elephant-racing-solid-subframe-bushings-997","title":"Elephant Racing Solid Subframe Bushings (997)","description":"\u003cp\u003e\u003cstrong\u003eDesigned to Fit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005 - 2012 Porsche 911 (all 997 except GT3)\u003c\/li\u003e\n\u003cli\u003e1999 - 2005 Porsche 911 (all 996 except GT3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis Rear Subframe Solid Bushing kit improves handling and precision by providing geometry correction for lowered cars and eliminating deflection. Porsche recognizes these performance benefits and uses a similar solid rear subframe mounting approach on the latest GT3 street and Cup racecars.\u003c\/p\u003e\n\u003cp\u003eReplaces stock rubber bushings in the rear subframe of the Porsche 996 and 997 cars, raising the subframe into the chassis 6.5mm (.25 inch).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eGeometry Correction\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eLowering the 996\/997 provides the benefits of lower center of gravity and improved appearance. Unfortunately lowering also causes the rear suspension members to angle down as the inner links drop with the chassis and the outer links remain at wheel upright height. This downward angle harms performance.\u003cbr\u003e\u003cimg class=\"aligncenter wp-image-2597 size-full\" src=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-solid-subframe-control-arm-illustration.jpg\" alt=\"Solid subframe bushing illustration for Porsche 996 and 997\" width=\"800\" height=\"412\" srcset=\"https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-solid-subframe-control-arm-illustration.jpg 800w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-solid-subframe-control-arm-illustration-150x77.jpg 150w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-solid-subframe-control-arm-illustration-300x155.jpg 300w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-solid-subframe-control-arm-illustration-768x396.jpg 768w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-solid-subframe-control-arm-illustration-110x57.jpg 110w, https:\/\/www.elephantracing.com\/wp-content\/uploads\/996-solid-subframe-control-arm-illustration-400x206.jpg 400w\" sizes=\"(max-width: 800px) 100vw, 800px\"\u003e\u003c\/p\u003e\n\u003cp\u003eWith the suspension members angling up towards the wheel the Roll Center is lowered which causes increased chassis lean, toe and camber curves are shifted and become less optimal, static toe and camber adjustments are shifted often exceeding the range of the stock adjusters.\u003c\/p\u003e\n\u003cp\u003eOur kit raises the rear subframe .25 inches (6.5mm) to help reverse the negative effects of lowering. Suspension member angles are improved and performance is enhanced. Our upper bushing fits inside the subframe, eliminating the entire thickness of the upper rubber bushing for the greatest possible geometry correction achievable from bushings alone.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEliminate Deflection\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eStock rubber bushings compress and deform under heavy cornering, braking, and acceleration loads. The compliant rubber bushings allow the entire rear subframe shift about relative to the chassis. Rear camber and toe settings wander along with the subframe making the car less predictable, less stable in turns.\u003c\/p\u003e\n\u003cp\u003eOur solid bushings replace the compliant rubber and do not deform under cornering loads, keeping the subframe in position and alignment true even under heavy cornering loads. The car becomes more predictable and easier to drive fast.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBuild Quality\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eEach bushing consists of two pieces, an upper plug and lower puck. The plug is machined from solid aluminum with knurled edges for perfect fit.\u003c\/p\u003e\n\u003cp\u003eLower puck is machined from solid steel with zinc finish for protection.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.elephantracing.com\/suspension\/instructions\/2290035_Rear-Subframe-Solid-Bushing-Instructions.pdf?iframe=true\u0026amp;width=80%\u0026amp;height=95%\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Elephant Racing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/logo_061813_medium.png?v=1486779151\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSuspension Science, Made Easy\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/elephant-racing-building-390_large.jpg?v=1486779314\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eElephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.\u003c\/p\u003e\n\u003cp\u003eSilicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/cad-drawings-390_large.jpg?v=1486779335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eER's 10,000 sqft R\u0026amp;D facility is located in Santa Clara, California USA. It is fully equipped with 3D CAD, testing, simulation and modeling tools, complete auto shop, and machine tools for development and prototyping. Building on our base of performance Porsche suspension technology, our areas of development focus include the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"small\"\u003eInteractive and semi-active suspension control\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAdvanced damper technology\u003c\/li\u003e\n\u003cli class=\"small\"\u003eAutomotive Suspension Mechatronics\u003c\/li\u003e\n\u003cli class=\"small\"\u003eWeb enablement and Web tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/files\/gt3-preview-390_large.jpg?v=1486779436\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThey hold patent in the category of suspension bushing design and are pursuing further patents in damper and semi-active suspension control technology.\u003c\/p\u003e\n\u003cp\u003eFounded in 2002, their innovation, continuously expanding product line, dedication to customer service, and global distribution has made Elephant Racing the leader in performance suspension for Porsche cars.\u003c\/p\u003e","brand":"Elephant Racing","offers":[{"title":"Default Title","offer_id":31697452236884,"sku":"2290035","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/products\/996-solid-subframe-bushings.jpg?v=1578605950"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1429\/9246\/collections\/42.png?v=1583269436","url":"https:\/\/flat6motorsports.com\/collections\/elephant-racing\/model_987-1-boxster+sub-category_lowering-springs.oembed","provider":"Flat 6 Motorsports - Porsche Aftermarket Specialists ","version":"1.0","type":"link"}