Agency Power Big MAF Cold Air Intake (997.2 Carrera)
Designed to Fit:
- 2009 - 2012 Porsche 911 DFI Carrera / Carrera S (997.2)
This intake has a larger than stock ID at the MAF and requires ECU Tuning to maximize its performance. Without proper tuning a CEL will occur.
Agency Power has been developing Porsche performance and handling products since 2005. The 2009 and up Porsche Carrera DFI car is extremely impressive with the power it makes for both the PDK and 6speed cars. As proven time and time again both on the track and their dyno, cold air intakes work. It is made from 6061 aluminum and features a CNC machined Mass Air Flow sensor mount. It features a Y design which places a K&N cone filter under each of the rear wing air duct tubes to give you a true ram air design while under driving conditions. The aluminum is extremely lightweight weight and does not conduct heat such as stainless steel. Each Y intake pipe is powder coated to further insulate it from engine heat. Inside the intake tube at the Y split is a deflector which forces the airflow to go up from each side directly into the throttle body without creating any additional turbulence. The intake is a direct OEM replacement featuring a 3.5 inch diameter neck with AP silicone coupler to attach to the throttle body. The remainder of the intake tube is all 3 inch and TIG welded. The intake sits in the engine bay with an aluminum tray keeping the intake separated from the engine. This tray is powder coated black for a stealthy appearance.
As tested on AP’s Mustang Dyno, their subject car was a 2009 PDK 997.2 Carrera running on 91 octane in an ambient temperature of 95F. The car baselined at 291rwhp and 249ft/lbs of torque. After the intake was installed, it dynoed at 305rwhp and 258ft/lbs of torque for a gain of 14rwhp and 9ft/lbs of torque. The Mustang dyno has a 15% drivetrain loss, so the crank horsepower gain is 16bhp. As you can see in the dyno graph, horsepower and torque is gained throughout the entire curve, not just peak. The intake pipe is available in several different colors to enhance your engine bay style. This cold air intake works with all 2009 DFI Porsche 997.2 Carrera and Carrera S cars.
About Agency Power
Agency Power Industries LLC was developed out of the need to provide quality, functional, and fashionable racing products. Starting from sway bar endlinks for the Subaru WRX back in 2003, Agency Power now has and in-depth number of parts for cars ranging from Porsche, BMW, Ferrari, Subaru, Mitsubishi, Nissan and many more. Based out of Gilbert, Arizona, Agency Power has established itself as one the core aftermarket companies for niche tuner products. Agency Power is constantly developing new functional and race proven products. With dealers worldwide, the AP brand is recognized and trusted. Beyond the USA, Agency Power can be found in regions such as Singapore, Canada, Australia, South Africa, Russia, United Kingdom, and other parts of the EU.
Innovative products such as multi adjustable control arms, valvetronic exhaust systems, and carbon fiber intakes kits, give Agency Power an edge to truly make a difference on your performance vehicle. Agency Power manufacturers its products only after in-depth product testing, racing, and quality checks are completed. Products like our full titanium Porsche exhausts, Ford Focus ST intercooler, and FRS/BRZ control arms are at the front of the competition. AP parts have been featured in magazines, videos, and customer competition events worldwide.
aFe MagnumFLOW Air Filters (Carrera S 997.2)
Designed to Fit: 2009 - 2012 Porsche 911 Carrera S / 4S NOTE: This product is a special order product that will ship directly from aFe. Please allow additional time to fulfill and ship the order. Includes both air filters. Product Details: Dry Filter (Pro Dry S) Outflows factory air filter by up to 15% Pre-oiled, washable/reusable Pro DRY S ...
aFe Twisted Steel Headers (Carrera 996 / 997.1)
Designed to Fit: 2002 - 2004 Porsche 911 Carrera / C4S (3.6L) 2005 - 2008 Porsche 911 Carrera (3.6L) / Carrera S (3.8L) NOTE: This product is a special order product that will ship directly from aFe. Please allow additional time to fulfill and ship the order. Product Details: 1-3/4" 16-gauge 304 stainless steel mandrel-bent tubing with a brus...
Agency Power 24mm Rear Adjustable Sway Bar (997 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / GT2 Product Details: In the quest to create the most well balanced suspension for the 997 Turbo, Agency Power has developed these sway bars to our specifications. The all-wheel drive Porsche turbo cars naturally have a lot of under steer. Understeer is when you take a turn but your car keeps goi...
Agency Power 25mm Front Adjustable Sway Bar (997 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / GT2 Product Details: In the quest to create the most well balanced suspension for the 997 Turbo, Agency Power has developed these sway bars to their specifications. The all-wheel drive Porsche turbo cars naturally have a lot of understeer. Understeer is when you take a turn but your car keeps go...
Agency Power Aluminum Shift Knob
Designed to Fit: 1999 - 2004 Porsche 911 2005 - 2008 Porsche 911 2009 - 2011 Porsche 911 2005 - 2012 Porsche Boxster 2006 - 2012 Porsche Cayman Product Details: Nail those perfect shifts with the all new Agency Power aluminum shift knob. This 6061 aluminum shift knob has a perfect fit to your hand and a good weight to throw the gears fast. ...
Agency Power Billet Short Shifter (Cayman / Boxster 987, 981, 996, 997)
Designed to Fit: 2006 - 2015 Porsche Cayman 2006 - 2015 Porsche Cayman S 2005 - 2015 Porsche Boxster 2005 - 2015 Porsche Boxster S 2008 Porsche Boxster RS60 2012 Porsche Cayman R 2015 Porsche Cayman GTS 1999 - 2010 Porsche 911 Carerra 2002 - 2010 Porsche 911 Turbo 2002 - 2005 Porsche Carerra 4S 2006 - 2010 Porsche Carerra S Product Details: Ag...
Agency Power Boost Recirculation Valves (997 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / GT2 Product Details: Agency Power has developed these OEM Boost Recirculation Valves (BRVs) for the Porsche 997 Turbo VTG turbochargers. Like on the older 996TT, the stock valves use a rubber diaphragm which will leak boost on the higher RPM. This part also deteriorates over time leading to boo...
Agency Power Carbon Fiber Add-on PDK Paddle Shifters
Designed to Fit: 2009 - 2016 Porsche 911 Carrera / Turbo 2009 - 2016 Porsche Cayman / S / GTS / GT4 2009 - 2016 Porsche Boxster / S / GTS / Spyder 2010 - 2016 Porsche Panamera / S / GTS / Turbo 2011 - 2016 Porsche Cayenne / S / GTS / Turbo Note - 2016+ model year paddles can be found here. Product Details: Agency Power has worked with many fla...
Agency Power Carbon Fiber Cold Air Intake (997.1 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / GT2 ITEM HAS BEEN DISCONTINUED please contact us to check stock on hand. Product Details: Agency Power has engineered the most complete cold air intake kit for the 2007 and up Porsche 997 Turbo and GT2. This cold air intake features components to help your car gain horsepower, improve throttle ...
Agency Power Carbon Fiber Decklid Intake Scoops (997 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / GT2 Product Details: Got a Porsche 997 Turbo and want to dress your engine bay up further? Agency Power now has these carbon fiber deck lid intake scoops to replace those boring plastic ones. The pair of scoops is a direct replacement of the stock ones. With a new high gloss 1×1 carbon fiber wea...
Agency Power Carbon Fiber GT2 Style Add-on Rear Wing (997 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / Turbo S Product Details: The Porsche 997 Turbo is an incredible machine that can reach unbelievable top speeds in its stock form. Taking this car to the track however requires some increased downforce. Downforce helps the car in traction by keeping the rear end planted on the ground. Modeled aft...
Agency Power Carbon Fiber Hood Grill Duct (987, 996, 997)
DISCONTINUED Designed to Fit: Bumpers with GT2 / GT3 Hood Grill Product Details: As seen on the GT3 and GT2, the hood grill located between the front bumper and hood actually has a purpose. This part acts like an air vent and helps pull more airflow across the front center radiator keeping the engine temps down. By its shape, it is aerodynami...