Agency Power Carbon Fiber Y-Pipe (Panamera Turbo)
Designed to Fit:
- 2010 - 2015 Porsche Panamera Turbo
As tested on a Mustang AWD Dyno, the Y-Pipe made 34awhp and 35ft/lbs of torque over the factory y-pipe.
The stock Y-Pipe is a 2 piece plastic Y design that is smooth on the inside with a “deflector” internally to channel air. The bad part about the stock one is it goes from a 78mm ID at the throttle body down to a approximately 51mm diameter Y split. This then connects to rubber boost hoses that expand under pressure. Both of these are a power robbers! If you retain the stock design and stock diameter hoses, YOU CANNOT GAIN power no matter if the YPipe is cast aluminum or plastic. This is why we made a complete Y-Pipe kit which retains a 3inch diameter design all the way to the factory end piece connections at the intercoolers.
The dyno sheet shows the car in standard mode with the stock Y piece versus our big Y-Pipe kit. These are huge gains throughout the ENTIRE rpm band which is impressive. Dyno proven results are not something to see, but something you can feel. The more airflow you get into that throttlebody the more HP you will gain. By eliminating the rubber boost hoses, you remove the pressure fluctuation from expansion which loses power. With our Y-Pipe kit, the air flow improvement improves every aspect of driving your Panamera Turbo. As tested on our Mustang AWD Dyno, the Y-Pipe made 34awhp and 35ft/lbs of torque.
These Y-Pipes are all made in the USA using carbon fiber braided sleeve and a bladder molding technique. The Y-Pipe includes necessary couplers and clamps for a true bolt on installation. All clamps should be torqued to no more then 15lbs. These are designed for the 2010 and up Porsche Panamera Turbo.
Much like your rubber brake lines, intercooler hoses expand under boost pressure. This causes a drop in pressure and that results in a loss of power. To combat this, most people replace the factory intercooler pipe connectors with silicone hoses or a new complete hard pipe. Agency Power has taken intercooler piping one step further and has released the all new intercooler pipe kit.
Utilizing mandrel bends, we designed the pipe to have a smooth air flow path without any restrictions. When installed, the intercooler pipe kit will fit securely with plenty of room for the factory engine cover. By installing this pipe kit, you will maintain boost pressure more efficiently, pick up throttle response, and gain horsepower. The pipe kit includes new silicone couplers and clamps for a secure and stylish look.
About Agency Power
Agency Power Industries LLC was developed out of the need to provide quality, functional, and fashionable racing products. Starting from sway bar endlinks for the Subaru WRX back in 2003, Agency Power now has and in-depth number of parts for cars ranging from Porsche, BMW, Ferrari, Subaru, Mitsubishi, Nissan and many more. Based out of Gilbert, Arizona, Agency Power has established itself as one the core aftermarket companies for niche tuner products. Agency Power is constantly developing new functional and race proven products. With dealers worldwide, the AP brand is recognized and trusted. Beyond the USA, Agency Power can be found in regions such as Singapore, Canada, Australia, South Africa, Russia, United Kingdom, and other parts of the EU.
Innovative products such as multi adjustable control arms, valvetronic exhaust systems, and carbon fiber intakes kits, give Agency Power an edge to truly make a difference on your performance vehicle. Agency Power manufacturers its products only after in-depth product testing, racing, and quality checks are completed. Products like our full titanium Porsche exhausts, Ford Focus ST intercooler, and FRS/BRZ control arms are at the front of the competition. AP parts have been featured in magazines, videos, and customer competition events worldwide.