Agency Power Plenum and 84mm Throttle Body (997.1 Turbo)
Designed to Fit:
- 2007 - 2009 Porsche 911 Turbo
Adding bolt-on horsepower to the 997 Turbo is a continuous quest by many enthusiasts looking for more power. Reverting back to old tuning technologies, Agency Power has developed an even larger throttle body and plenum kit for the Porsche 997 Turbo to gain added performance. The point of a larger throttle body is to get in more air. The more air you bring in, the more power you make. The 997 Turbo’s engine intake system works off pulses, so how that air is diverted to either side of the engine is not as important as the volume incoming. The plenum kit includes an OEM Porsche throttle body (part# 99760511601) which is a direct bolt on and plug in for the electronic throttle control with no modifications needed. This throttle body has a 84mm inner diameter compared to the stock one of 75.64mm. We already offer a slightly smaller upgrade that measures in at 77.64mm, but this larger diameter is designed for maximum top end power.
The Agency Power plenum kit is made using high quality 6061 aluminum that has been TIG welded and pressure tested in a T shape to mimic the OEM design. The CNC machined 4 bolt throttle body flange features a groove to accompany a rubber o-ring to ensure a secure and sealed fit with the OEM Porsche Cayenne throttle body. The T plenum features the necessary fittings for stock vacuum hoses and breather lines and includes a 1 way check valve needed. Each T plenum is powder coated gloss black for an OEM look and includes new silicone couplers in black and worm clamps to secure it to the factory intake manifolds. The installation of the plenum requires removal of the factory airbox and Y pipe to access the component. Recommended installation time is approximately 3 hours.
Installation of the Agency Power plenum kit DOES NOT require the ECU to be flashed. The factory ECU will adjust accordingly to the change in throttle body diameter. However, corresponding mods including an ECU flash will only bring out additional power. Made in the USA.
About Agency Power
Agency Power Industries LLC was developed out of the need to provide quality, functional, and fashionable racing products. Starting from sway bar endlinks for the Subaru WRX back in 2003, Agency Power now has and in-depth number of parts for cars ranging from Porsche, BMW, Ferrari, Subaru, Mitsubishi, Nissan and many more. Based out of Gilbert, Arizona, Agency Power has established itself as one the core aftermarket companies for niche tuner products. Agency Power is constantly developing new functional and race proven products. With dealers worldwide, the AP brand is recognized and trusted. Beyond the USA, Agency Power can be found in regions such as Singapore, Canada, Australia, South Africa, Russia, United Kingdom, and other parts of the EU.
Innovative products such as multi adjustable control arms, valvetronic exhaust systems, and carbon fiber intakes kits, give Agency Power an edge to truly make a difference on your performance vehicle. Agency Power manufacturers its products only after in-depth product testing, racing, and quality checks are completed. Products like our full titanium Porsche exhausts, Ford Focus ST intercooler, and FRS/BRZ control arms are at the front of the competition. AP parts have been featured in magazines, videos, and customer competition events worldwide.
aFe MagnumFLOW Air Filters (Carrera S 997.2)
Designed to Fit: 2009 - 2012 Porsche 911 Carrera S / 4S NOTE: This product is a special order product that will ship directly from aFe. Please allow additional time to fulfill and ship the order. Includes both air filters. Product Details: Dry Filter (Pro Dry S) Outflows factory air filter by up to 15% Pre-oiled, washable/reusable Pro DRY S ...
aFe Twisted Steel Headers (Carrera 996 / 997.1)
Designed to Fit: 2002 - 2004 Porsche 911 Carrera / C4S (3.6L) 2005 - 2008 Porsche 911 Carrera (3.6L) / Carrera S (3.8L) NOTE: This product is a special order product that will ship directly from aFe. Please allow additional time to fulfill and ship the order. Product Details: 1-3/4" 16-gauge 304 stainless steel mandrel-bent tubing with a brus...
Agency Power 24mm Rear Adjustable Sway Bar (997 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / GT2 Product Details: In the quest to create the most well balanced suspension for the 997 Turbo, Agency Power has developed these sway bars to our specifications. The all-wheel drive Porsche turbo cars naturally have a lot of under steer. Understeer is when you take a turn but your car keeps goi...
Agency Power 25mm Front Adjustable Sway Bar (997 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / GT2 Product Details: In the quest to create the most well balanced suspension for the 997 Turbo, Agency Power has developed these sway bars to their specifications. The all-wheel drive Porsche turbo cars naturally have a lot of understeer. Understeer is when you take a turn but your car keeps go...
Agency Power Aluminum Shift Knob
Designed to Fit: 1999 - 2004 Porsche 911 2005 - 2008 Porsche 911 2009 - 2011 Porsche 911 2005 - 2012 Porsche Boxster 2006 - 2012 Porsche Cayman Product Details: Nail those perfect shifts with the all new Agency Power aluminum shift knob. This 6061 aluminum shift knob has a perfect fit to your hand and a good weight to throw the gears fast. ...
Agency Power Big MAF Cold Air Intake (997.2 Carrera)
Designed to Fit: 2009 - 2012 Porsche 911 DFI Carrera / Carrera S (997.2) Product Details: This intake has a larger than stock ID at the MAF and requires ECU Tuning to maximize its performance. Without proper tuning a CEL will occur. Agency Power has been developing Porsche performance and handling products since 2005. The 2009 and up Porsche...
Agency Power Billet Short Shifter (Cayman / Boxster 987, 981, 996, 997)
Designed to Fit: 2006 - 2015 Porsche Cayman 2006 - 2015 Porsche Cayman S 2005 - 2015 Porsche Boxster 2005 - 2015 Porsche Boxster S 2008 Porsche Boxster RS60 2012 Porsche Cayman R 2015 Porsche Cayman GTS 1999 - 2010 Porsche 911 Carerra 2002 - 2010 Porsche 911 Turbo 2002 - 2005 Porsche Carerra 4S 2006 - 2010 Porsche Carerra S Product Details: Ag...
Agency Power Boost Recirculation Valves (997 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / GT2 Product Details: Agency Power has developed these OEM Boost Recirculation Valves (BRVs) for the Porsche 997 Turbo VTG turbochargers. Like on the older 996TT, the stock valves use a rubber diaphragm which will leak boost on the higher RPM. This part also deteriorates over time leading to boo...
Agency Power Carbon Fiber Add-on PDK Paddle Shifters
Designed to Fit: 2009 - 2016 Porsche 911 Carrera / Turbo 2009 - 2016 Porsche Cayman / S / GTS / GT4 2009 - 2016 Porsche Boxster / S / GTS / Spyder 2010 - 2016 Porsche Panamera / S / GTS / Turbo 2011 - 2016 Porsche Cayenne / S / GTS / Turbo Note - 2016+ model year paddles can be found here. Product Details: Agency Power has worked with many fla...
Agency Power Carbon Fiber Cold Air Intake (997.1 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / GT2 ITEM HAS BEEN DISCONTINUED please contact us to check stock on hand. Product Details: Agency Power has engineered the most complete cold air intake kit for the 2007 and up Porsche 997 Turbo and GT2. This cold air intake features components to help your car gain horsepower, improve throttle ...
Agency Power Carbon Fiber Decklid Intake Scoops (997 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / GT2 Product Details: Got a Porsche 997 Turbo and want to dress your engine bay up further? Agency Power now has these carbon fiber deck lid intake scoops to replace those boring plastic ones. The pair of scoops is a direct replacement of the stock ones. With a new high gloss 1×1 carbon fiber wea...
Agency Power Carbon Fiber GT2 Style Add-on Rear Wing (997 Turbo)
Designed to Fit: 2007 - 2012 Porsche 911 Turbo / Turbo S Product Details: The Porsche 997 Turbo is an incredible machine that can reach unbelievable top speeds in its stock form. Taking this car to the track however requires some increased downforce. Downforce helps the car in traction by keeping the rear end planted on the ground. Modeled aft...