StopTech Street Rear Axle Pack - Brake Kit w/ Rotors & Pads (Macan S)
Designed to fit:
- 2015+ Porsche Macan S (Front)
NOTE: This product is a special order product that will ship directly from StopTech. Please allow additional time to fulfill and ship the order.
Excessive heat can cause resins in your brake pad to vaporize or "outgas." As the brake pad wears, the used friction material turns into a fine dust. This boundary layer of heat, gas and dust builds up between the pad and rotor surfaces and inhibits performance. Here's where StopTech SportStop slotted brake rotors make a big difference. StopTech SportStop Slotted Brake Rotors are a true performance rotor and feature:
- Power Alloy castings
- Engineered Performance Rotor
- Superior resistance to cracking due to thermal stress
- Increased molybdenum (higher carbon) content that extends reliability, service life and helps reduce NVH “noise” issues
- Rotor material is a direct descendant of the patented AeroRotor from StopTech
- Introducing directional curve vane design
- Improved vane design or OE equivalent on all rotors
- Center split castings
- New short slot design runs perpendicular to the vane to preserve rotor strength
- Direct OE Replacement
- Improved wet weather response
- Increased initial “bite”
- Double disc ground for a consistent friction surface and Improved pad bed-in
- Mill balanced
- Black E-Coated non-friction surfaces on “Power Alloy” rotors
- Enhances open wheel appearance
StopTech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech SportStop Cross-Drilled rotors.
SportStop Drilled brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
Every SportStop Drilled brake rotor is produced from a high quality Centric Parts blank casting and finished in a durable e-coating for corrosion resistance.
SportStop Drilled rotors look great behind custom wheels, improve the initial bite of the brake pads, and help wipe away the debris that forms between the pad and the disc. A set of SportStop cross-drilled rear replacement rotors is a great way to match the aesthetics of a StopTech Big Brake Kit with the cross-drilled rotor option.
Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
Power Alloy Metallurgy
Power Alloy metallurgy is exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
Cooling Vane Design
Nearly all SportStop cross-drilled rotors have unique drilled hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
StopTech is the high performance and racing brand from Centric Parts - a leading innovator of world class brake components and systems for production-based race cars and high performance vehicles on the street and track. StopTech was the first to offer balanced brake upgrades for production cars and remains the worldwide leader with over 700 platform offerings that dramatically improve overall braking performance.
StopTech was founded in 1999 with the singular mission of becoming the leading aftermarket manufacturer and supplier of high performance brake components and systems. The company founders sought to challenge the status quo in known brake technology, and set new paradigms for brake system upgrades. United by their passion for racing and high performance vehicles, the company quickly earned a reputation for quality and performance both on and off the track.
StopTech’s industry-leading technologies and materials - from rock solid calipers to ingeniously efficient heat handling rotors - have earned the company four patents and numerous industry honors over the years. In 2013, StopTech earned full ISO/TS 16949:2009 Quality Management System certification for the design and manufacture of automotive brake systems and components, allowing the company to supply OEM vehicle assembly plants directly in a Tier 1 relationship.
StopTech has been awarded the highly coveted TÜV approval on several big brake kits. StopTech kits successfully passed TÜV’s demanding series of tests that range from performance and durability, to proper fitment and ease of installation. Although TÜV certification is not required in all countries, TÜV approval demonstrates that StopTech’s Balanced Brake Upgrades meet the rigorous standards set by this respected German agency. StopTech Big Brake Kits have been awarded a Teilgutachten. The complete kit is certified to run on a particular application, so customers do not need to pay for further testing with the TÜV agency.
Raceseng Ashiko - Shift Knob
Designed to Fit: 2006 - 2016 Porsche Cayman 2006 - 2016 Porsche Cayman S 2005 - 2016 Porsche Boxster 2005 - 2016 Porsche Boxster S 2008 Porsche Boxster RS 60 2016+ Porsche Cayman GT4 2017+ Porsche Boxster / Boxster S (uses 981 adapter) 2017+ Porsche Cayman / Cayman S (uses 981 adapter) NOTE - Engraved option will include machined gate pattern ...
Flat 6 Motorsports High Flow Intake System (Macan)
Designed to Fit 2015+ Porsche Macan S / GTS 2015+ Porsche Macan Turbo 2015+ Porsche Macan 2.0T (Base) 2015+ Porsche Macan S Diesel Product Details The Flat 6 Motorsports High Flow Intake System is the most advanced engineered intake system available for the Porsche Macan. Aided by CFD analysis, we optimized the intake air flow, providing a max...
Motul 100% Synthetic RBF 660 - Racing Brake Fluid DOT 4 (0.5L)
Product Details: Very high dry boiling point of 622F (328C) and a wet boiling point of 399F (204C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for brake cooling. ...
Alpha Performance (AMS) High-Flow Air Filter (Macan)
Designed to Fit 2015+ Porsche Macan S 2015+ Porsche Macan Turbo 2017+ Porsche Macan GTS 2017+ Porsche Macan 2.0T Product Details More Air In Equals More Horsepower Out The new Alpha Performance Porsche Macan High-Flow Air Filters are exactly what your performance SUV needs to take deep breaths and produce more power! Simply dropping this filte...
Cobb Tuning Access Port V3 (Macan)
Designed to fit 2015+ Porsche Macan S 2015+ Porsche Macan Turbo 2017+ Porsche Macan GTS 2017+ Porsche Macan Base 2.0L Product Details The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Porsche. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations....
RennChip Power Box (Macan S)
Designed to fit 2015+ Porsche Macan S Product Description Porsche provided the Macan S with a solid 340HP from the factory but it still lacks the overall power of it's older brother the Turbo. The RennChip Power Box is prime for getting more power out of your Macan S. The Power Box adds 58 peak horsepower improving acceleration and throttle re...
Flat 6 Motorsports - Cobb Stage 1+ Map (Macan S / GTS / Turbo)
Designed to Fit 2015+ Porsche Macan S / GTS / Turbo Note - Please include your Cobb Accessport Serial Number in the order notes upon checkout. (ex. POR0900111) Each map needs to be tuned for your specific vehicle, so please allow 24-48 hours to receive the tuned Stage 1+ file. Product Details The Flat 6 Motorsports Stage 1+ Map for the Macan...
RSS Performance Engine Mounts (996 / 997)
Designed to fit 1999 - 2012 Porsche 911 (including all variants) Product Details The RSS Tarmac Series Performance Engine Mounts are designed for the Porsche driver who demands the absolute maximum in precision handling, feedback and control from their chassis. With factory hydraulic engine mounts, the drivetrain will move independent of the c...
RennChip Power Box (Macan 2.0T)
Designed to fit 2017+ Porsche Macan Turbo (2.0T) Product Details Porsche released the Macan 2.0 leveraging Audi's famed 2.0 TFSI powerplant. Porsche went a step further to enhance the powerplant to fit the prowess of the Macan. The RennChip Power Box is prime for getting more power out of your Macan 2.0. The Power Box adds 50 peak horsepower i...
Agency Power Carbon Fiber Add-on PDK Paddle Shifters (Gen 2)
Designed to Fit: 2016+ Porsche 911 Carrera / Turbo / GT3 (991.2) 2016+ Porsche Cayman & Boxster / S / GTS / GT4 (981 / 718) 2016+ Porsche Panamera (971) 2016+ Porsche Cayenne (958.2) 2015+ Porsche Macan All steering wheels that have the Sport Design 2 Steering Wheel with aluminum paddle shifters Note - Pre-2016 model year paddles can be fo...
Agency Power Aluminum Add-on PDK Paddle Shifters (Gen 2)
Designed to Fit: 2016+ Porsche 911 Carrera / Turbo / GT3 (991.2) 2016+ Porsche Cayman & Boxster / S / GTS / GT4 (981 / 718) 2016+ Porsche Panamera (971) 2016+ Porsche Cayenne (958.2) 2015+ Porsche Macan Note - Pre-2016 model year paddles can be found here. Product Details: The new Porsche PDK transmission found in the 2016+ Porsche vehicle...
IPD Competition Intake Plenum (987.1 Cayman / Boxster)
Designed to Fit: 2006 - 2008 Porsche Cayman S 2006 - 2008 Porsche Cayman 2005 - 2008 Porsche Boxster S 2005 - 2008 Porsche Boxster Note - Please indicate your model and engine size in ordering comments (2.7L, 3.2L, or 3.4L) Power Gains: The IPD Competition Plenum has been shown on a dyno to add a max HP gain of 14hp and 13 ft/lb of torque! Pr...