Burger Tuning Methanol Injection Kit (Macan S 19+)
Designed to fit:
- 2019+ Porsche Macan S (facelift 3.0T only)
Designed to install with Macan S 19+ JB4 (sold separately).
Take your JB4 to the next level with this Add-On Water-Methanol Injection kit. Plug and play with 95B.2 Facelift Macan models, this is a sure-fire way to safely add more boost and power to your V6 Turbo engine.
Water/Methanol/Alcohol injection commonly referred to as WMI allow you to make tremendous amounts of power on pump gas. The effect is similar to running 100 octane race gas or E85 fuel all the time with the additional cooling benefits allowing for more power than you can make on race gas or E85 alone.
The key to a safe and effective WMI setup is tuning integration. The Audi B9 S4 BMS WMI kit integrates to the JB4 tuning system allowing for precise mapping based on boost, throttle position, engine speed, intake temperature, advance, gear, and other data elements available to the JB4 through its CANbus system. In addition a pump flow signal is fed back to the JB4 allowing for a safe and smooth progressive boost mapping. If the tank runs empty or flow drops for any reason the JB4 will safely back down performance to avoid detonation. Boost is held low until WMI is properly flowing to avoid tip in knock common with non-integrated WMI setups. In addition WMI can be activated or disabled right from the JB4 Mobile app , will automatically disengage during traction control or safety map situations, and WMI flow data can be displayed via your JB4 Mobile logging device.
- 1x Aquatec WMI Pump
- 1x High Speed Solenoid
- 1x WMI In-line Filter
- 1x Clear 1-Gal Tank
- 1x Direct Fit Nozzle Adapter
- 2x BM5 Spray Nozzles
- All required lines, wires, fittings.
About Burger Tuning:
Flat 6 Motorsports is proud to partner with Burger Tuning to provide the best piggyback tuning experience to our Porsche fans. Enjoy the customization, power gains, and easy install without worrying about flashing your ECU!
Ready to take it to the next level? Burger Motorsports is the manufacturer of the world-famous JB4 performance tuner. We've been pioneering plug & play performance tuning, intakes, and mods for street-inspired race cars since 2007.
The JB4 is a plug and play tune available for turbocharged vehicles. The tuner installs between your cars sensor and it's DME/ECU (computer) and manipulates vehicle performance through these connections. While it's not the only tuning system that operates this way the JB4 separates itself from the competition with much more advanced connection points and processing including CANbus, fuel & spark control, bluetooth to your smartphone, and a variety of innovative and advanced features not possible with any other system. BMS regularly publishes free mapping and firmware updates adding performance and features as ongoing development allows. In addition the JB4 system is not VIN locked to your vehicle and can quickly removed and swapped between cars or resold at a later time. Often imitated but never duplicated the JB4 has been the gold standard in plug and play turbocharged performance tuning for over a decade.