Schroth Racing 6-Point 3x2 Enduro Harness (For Porsche Carbon Seats)
Designed to fit:
- Porsche Factory Carbon Seats (Pictured)
Note - This harness only fits with the driver Carbon seat, which allows the sub-belts. 2x2 Pictured.
Success in endurance racing depends on durability, quality and speed. The Enduro-Belt is packed with features which will reduce your driver change times!
Porsche GT3 belts are designed specifically for street cars with Porsche’s factory One Piece Carbon Buckets. What makes GT3 belts different? The lap belts use specific sewn-in brackets that fit perfectly on the factory mount on the Porsche carbon buckets. A standard belt would require additional fabrication and a spacer to make them work with the factory seats. These are a bolt-in replacement which is much easier.
Available with Pull-Down lap belts and no Adjust subs only. Shoulders are 3".
Schroth’s top-of-the-line racing harness uses the widely praised "ZIP Adjuster”. Integrated into the lap belt buckle attachments, “ZIP Adjusters” optimize the position of the adjusters for perfect tightening. The design of the "ZIP Adjusters" allows for exceptional ease of adjustment (tightening) and release for faster and smoother driver changes.
If you drive a GT3 Cup car or are driving a Porsche with a fixed back race seat, a standard non Porsche specific harness such as the Enduro 2x2 or Flexi 2x2 would be better suited for your vehicle.
- Shoulders: Pull Down 3"
- Laps: Pull Down 2"
- Subs: Pull Up 2"
- Shoulder: LV7 Wrap (3" Shoulders)
- Lap: Sewn-in B43A (GT3 Specific Hardware)
- Subs: LV10 with B14 Snap-in Bracket Wrapped-in
- (1) SG23 eyebolt and (2) S3 wavy washers for substrap installation
- (2) B24 bolt in brackets, (2) LV4 2 bar slides, (2) 7/16 pivot sleeves, and (2) 7/16 flat washers for optional bolt in substrap installation
- (2) SG10 bolts, (2) SG29 bolts, (2) wavy washers, (2) 7/16 pivot sleeves, (2) 7/16 flat washers, (4) spacers for a number of different lap belt installations
- FIA 8853-2016
About Schroth Racing Products
SCHROTH Safety Products GmbH has been developing and manufacturing restraint systems and other safety solutions for highly specialized applications in vehicles and aircraft for many decades. SCHROTH and its sister companies operate manufacturing and development facilities in Arnsberg, North Rhine-Westphalia, Federal Republic of Germany and in Pompano Beach / Florida (USA).
SCHROTH is a world leader in restraint technology for aircraft and ground vehicle applications, offering the most advanced and innovative restraint solutions available today.
Over 70 years of experience have made SCHROTH a prime address for sophisticated and customized occupant protection systems in any kind of aircraft, performance race cars as well as for defense and other special applications.
Today, SCHROTH employs about 120 staff in Germany with extensive multi-lingual capabilities and a wealth of experience in aviation, defense and automotive environments. The SCHROTH team is united in its focus and determination to provide customers with an outstanding range of products and services to enhance safety, operational success, and profitability.