Soul Performance Products - Resonated Muffler Bypass Exhaust (Macan S / GTS / Turbo)
Designed to Fit
2015+ Porsche Macan S / GTS / Turbo (including 95B.1 and 95B.2)
SOUL’s mandrel bent 2.5″ rear system offers a refined increase in shift barks, burble, and engine tone while minimizing drone with high flow race resonators.
- Increases the desirable spectrum of engine notes and tone while minimizing drone with race resonators
- Weighs approximately 13.9 lbs / 6.3 kg less than factory exhaust components (34.4 lbs vs 21.15 lb)
- Designed and built in-house at Soul's Willow Grove, PA facility
- All Soul Performance Products are backed by an industry leading Lifetime Warranty for both street and track use
DEVELOPMENT AND TESTING:
DEVELOPMENT: The Macan is quite refined with generous sound deadening and heavy muffling in the exhaust. Evaluation of the factory midpipes reveals a very high flowing and relatively smooth flowing design. Porsche incorporated a factory break point and the rear section is what holds the exhaust back. The SOUL Resonated Muffler Bypass Exhaust forgoes the factory mufflers for a clamp on, 2.5″ straight pipe design with the addition of race resonators to minimize drone. The straight through design of our race resonators encourages maximum power and sound under heavy throttle while cutting down on harsh frequencies that can make their way into the cabin and cause droning on partial throttle and during cruising conditions. This is the ideal solution to pair with an aftermarket downpipe to prevent drone and raspiness. The Y pipe setup exiting out through quad tips encourages equal exhaust distribution and tip adjustability to allow for either a flush or staggered appearance in the bumper.
SOUND: Expect a refined increase in sound with a bark after each shift and mild burbling on deceleration. Full throttle pulls reveal more turbo sound and engine sound while taking your foot off the pedal calms things down. Comfort mode can yield some slight droning when the car kicks up into higher gears for cruising which can be remedied by running in Sport mode or shifting down a gear.
CONSTRUCTION: Each set of muffler bypass pipes is built in-house out of mandrel bent, thick wall .065″” T304L stainless steel. Back purged TIG welding (with ARCAL™ Prime argon gas) ensures proper weld penetration and longevity. Straight through race resonators with a full metal packing design for maximum durability. We fabricate using thick gauge aluminum fixtures which act as a great heat sink during the welding process and prevent warping not only of our products, but the fixtures themselves to ensure perfect fitment.
BOLT ON AND GO: Each system is quality checked then foam packed to arrive in perfect condition. Installation requires cutting the original exhaust at a factory break point (marked with a dimple) which allows for reinstallation of the factory system if necessary. Thorough installation instructions are included in the box for a straightforward install that can be performed by most DIY enthusiasts. Valve simulators are included to prevent a check engine light.
LIFETIME WARRANTY: Enjoy your SOUL exhaust components with confidence on both the street and track as they are covered by a Lifetime Warranty!
About Soul Performance Products
Our mission is to provide our customers with outstanding parts, pricing, and service backed up with the best warranty in the industry.
Soul Performance was formed by a team of auto enthusiasts with automotive industry experience looking to do the right thing by our customers. We aim to deliver exemplary service worldwide by developing incredible sounding, proven performing components that are always ready to ship to you quickly.
- Do right by our customers, always – no customer left behind
- We believe in honesty, unwavering ethics, and transparency as we operate
- Our product warranty extends longer and broader than our competition
- We actively participate in the communities we cater to
- We build connections to further our ability to deliver a premium experience
- Our passion for cars and the automotive industry drives our business
- Our experience helps us meet your expectations
- We listen to our customers and the demands of the market to meet and exceed expectations
- We want to be our customers first choice without hesitation
- We consider both quality and pricing to deliver greater value to our customers
- Our success will be measured by recommendations to other potential clients
FACILITY Soul Performance Products is located in a 15,000 sq ft facility north of Philadelphia in Willow Grove, Pennsylvania. We make great use of this space to keep our products in stock, ready to ship. Our mission is to quickly get you the parts you need with no delays. Our R&D area is equipped with two BendPak lifts and all tools necessary to allow us to design, engineer, test, prototype, and fixture components. Our shipping area is set up to ensure that all components get a thorough inspection, orders ship complete with all hardware, and that products are well packed.
Nearest hotel: SpringHill Suites by Marriot – .3 miles Nearest airport: Philadelphia International Airport (PHL) – 36 miles
MANUFACTURING Soul Performance Products is partnered with ISO 9001 Certified aerospace manufacturers, enabling us to work with technology and industrial scale, extreme precision equipment down to +/- 0.002 inches that would otherwise be out of the limits of an exhaust manufacturer. Our capabilities include waterjet and laser cutting, tube bending, CNC machining, robotic welding and much more. We strategically deal with vendors worldwide to find appropriate components, such as high quality HJS HD catalytic converters. Our mission is to provide the best possible results for our customers at great pricing.
If you’re interested in participating in new product development or have any customization desires we’re always happy to accommodate wherever possible. Need custom exhaust tips to match your unique build? We can do that.
PERFORMANCE We’re constantly building relationships with shops across the world to prove our products on various dyno setups under different conditions. We don’t want you to take our word for it alone, but allow us to validate ourselves through multiple outside channels as well. If you’re interested in testing our components, do contact us.