Soul Performance Products - Sport Headers (991.2 Carrera)

Product Details

Soul Performance Products performance headers increase power, response, and sound without compromising ground clearance.

Features

• Max power gains of approximately 12 whp and 20 ft-lbs of torque (as tested on Base model with ECU tune)
  
• Weighs 5.4 lbs / 2.4 kg less than factory exhaust components (9.9 lbs vs 15.3 lb)
• Designed and built in-house at our Willow Grove, PA facility
• All Soul Performance Products are backed by a Lifetime Warranty for both street and track use

DEVELOPMENT:  We sought out to maximize performance and boost response while minding clearance on daily driven cars. Our optimized 3 into 1 merge collector design improves response over the poor factory design, while our runners ultimately increase exhaust velocity into the collector and turbo. Looking into the factory headers you will notice a support in the middle runner which is detrimental to a smooth flow path out of that exhaust port – all in all the design is very basic with lots of room for improvement. The factory turbo inlet measures around 1.54” ID and we sized our header outlet to 1.63” for a smooth flow path into the turbo. The internal volume of the header combined with the resulting design improvements pairs well with the efficiency map of the turbo giving you noticeably quicker boost response and more power throughout the RPM range. Pushing the gas pedal down commands faster feedback from the car and each gear has more usable power before a downshift.

The factory header utilizes a double wall design while our design is single wall yielding in a more pleasing, sharper edge to the exhaust and increased turbo sound. Exhaust volume and tone quality are delightfully increased without yielding drone or undesirable qualities. Expect more burbles and sharper pops between shifts and on deceleration.

POWER: Below are the real, unedited, straight from the Mustang dyno results as conducted by Apex Autoworks with before and after runs on a Base model Carrera already equipped with SOUL Sport Catalytic Converters and SOUL Performance Exhaust with COBB Accessport Stage 2 Map. This dyno chart is made of the average performing charts of 3 before and 6 after runs. Max power gains of 12 whp and 20 ft-lbs come in quickly and hold until redline for a noticeable increase in driving performance. A custom Pro Tune would further take advantage of the increased flow and unlock greater gains.

CONSTRUCTION:  Each set is assembled in house in the USA out of laser cut flanges and mandrel bent, thick wall .065″” T304L stainless steel. Back purged TIG welding (with ARCAL™ Prime argon gas) ensures proper weld penetration and longevity. We fabricate these headers using thick gauge aluminum fixtures which act as a great heat sink during the welding process and prevent warping not only of our products, but the fixtures themselves to ensure perfect fitment.

BOLT ON AND GO:  Every component is rigorously quality-checked, tested in a fixture to guarantee fitment, and then foam packed to ensure they arrive in perfect condition. New high grade hardware and OEM Porsche gaskets are included for installation.

Video

About Soul Performance Products

Our mission is to provide our customers with outstanding parts, pricing, and service backed up with the best warranty in the industry.

Soul Performance was formed by a team of auto enthusiasts with automotive industry experience looking to do the right thing by our customers. We aim to deliver exemplary service worldwide by developing incredible sounding, proven performing components that are always ready to ship to you quickly.

CORE VALUES

• Do right by our customers, always – no customer left behind
• We believe in honesty, unwavering ethics, and transparency as we operate
• Our product warranty extends longer and broader than our competition
• We actively participate in the communities we cater to
• We build connections to further our ability to deliver a premium experience
• Our passion for cars and the automotive industry drives our business
• Our experience helps us meet your expectations
• We listen to our customers and the demands of the market to meet and exceed expectations
• We want to be our customers first choice without hesitation
• We consider both quality and pricing to deliver greater value to our customers
• Our success will be measured by recommendations to other potential clients

FACILITY Soul Performance Products is located in a 15,000 sq ft facility north of Philadelphia in Willow Grove, Pennsylvania. We make great use of this space to keep our products in stock, ready to ship. Our mission is to quickly get you the parts you need with no delays. Our R&D area is equipped with two BendPak lifts and all tools necessary to allow us to design, engineer, test, prototype, and fixture components. Our shipping area is set up to ensure that all components get a thorough inspection, orders ship complete with all hardware, and that products are well packed.

Nearest hotel: SpringHill Suites by Marriot – .3 miles Nearest airport: Philadelphia International Airport (PHL) – 36 miles

MANUFACTURING Soul Performance Products is partnered with ISO 9001 Certified aerospace manufacturers, enabling us to work with technology and industrial scale, extreme precision equipment down to +/- 0.002 inches that would otherwise be out of the limits of an exhaust manufacturer. Our capabilities include waterjet and laser cutting, tube bending, CNC machining, robotic welding and much more. We strategically deal with vendors worldwide to find appropriate components, such as high quality HJS HD catalytic converters. Our mission is to provide the best possible results for our customers at great pricing.

If you’re interested in participating in new product development or have any customization desires we’re always happy to accommodate wherever possible. Need custom exhaust tips to match your unique build? We can do that.

PERFORMANCE We’re constantly building relationships with shops across the world to prove our products on various dyno setups under different conditions. We don’t want you to take our word for it alone, but allow us to validate ourselves through multiple outside channels as well. If you’re interested in testing our components, do contact us.